• TBS RC TX TBS Crossfire Nano 900MHz RC Transmitter Module - Starter Combo Kit
  • TBS RC TX TBS Crossfire Nano 900MHz RC Transmitter Module - Starter Combo Kit
  • TBS RC TX TBS Crossfire Nano 900MHz RC Transmitter Module - Starter Combo Kit
  • TBS RC TX TBS Crossfire Nano 900MHz RC Transmitter Module - Starter Combo Kit
  • TBS RC TX TBS Crossfire Nano 900MHz RC Transmitter Module - Starter Combo Kit
1 5

TBS Crossfire Nano 900MHz RC Transmitter Module - Starter Combo Kit

TBS Crossfire Nano 900MHz RC Transmitter Module - Starter Combo Kit

$143.99
$143.99
Add To Wishlist
View full details

Details

Description

The Crossfire Nano TX from TBS has the same RF internals as the Micro TX V2 but now comes in a smaller "lite" module interface. The Nano TX was designed to fit X-Lite and X9D Lite radios with their "lite" style module interface.

The Nano TX is designed to be installed in X-lite and X9D Lite radios with the "Lite" interface. Performance, functionalities, and even pricing will be the same as the Micro TX V2.

Check out the rest of out TBS Products and our RC Transmitters!

Features

Apart from unparalleled range, the thing that we are most proud of on the TBS Crossfire is that it just works. In the past, our question always was "could our R/C link keep up?". With the TBS Crossfire comes peace of mind. But don't take our word for it. All leading drone racing organizers require pilots to fly the TBS Crossfire. All top drone racers fly the TBS Crossfire. The furthest long range missions are flown with TBS Crossfire. Now it has become affordable to the masses as a general-purpose radio link!

Telemetry / CRSF

As a modern R/C link, it has telemetry built-in. Two-way communication opens up new possibilities. From streaming MAVLink to your smart device (no Mavlink stream support for Crossfire Micro TX!) to updating your firmware, setting your video transmitter channel, or adjusting flight control parameters such as PIDs. Adaptive bandwidth controls the speed of transmission or optimizes for ultimate range. CRSF is a proprietary TBS communication protocol between the Crossfire and R/C and Flight Control. It provides ultra-low latency with incredible bandwidth (3x faster, 6x more data than any comparable protocol!). With such tight integration, the TBS Crossfire is the logical choice for anyone flying Betaflight, KiSS, or ArduPilot/Pixhawk platforms.

Specifications

Frequency Bands: 915MHz (USA, Asia, Australia)
Input Voltage: 3.5 - 13V
Connector: USB-C
Power consumption: 1.1W (@10mW) - 2W (@100mW)

Includes

  • 1 x TBS Crossfire Nano TX
  • 1 x X9D Lite Adapter
  • 3 x TBS Crossfire Nano RX
  • 3 x TBS Crossfire Micro Receiver Antenna
  • 3 x TBS Crossfire Immortal T V2 Antenna
  • 3 x Cables and Shrink Tubes set

More Info

  • SKU: 14428
  • Barcode: 766234651639
 

Overall rating: 4.742857 / 5 from 35 reviews.

AI Generated Review Summary

Summary topics

Review topics: [fit, shipping, value, range, combo, crossfire, set, module].

Review highlights

Reviews

Crossfire is great. I did

"Crossfire is great. I did not have an opportunity to use this product since I ordered the incorrect part. Get FPV kindly returned it and I acquired an micro instead of nano. I use the mavlink over crossfire which works brilliantly!"

— Mikiah G. (4/5)

The most awesomest radio link in existence

"Dude! It fit so nice in the x lite taranis just clicks right in. Great combo comes with everything to get 3 quads connected. Amazing range I have not fail safed since I got crossfire I flew about 2KM away first flight (testing the hype) into a nature park around THE ENTIRE PARK with trees n flew back not one time did it F/S. YOUR BATTERIES WILL LITTERALY HAVE TO DIE BEFORE YOU LOSE TELEM! Now I want a wing just to see how far I can go! P.S You don't have to go on any extra websites at all just binds with the click of a button one on the tx on on the rx simple!"

— Mike K. (5/5)

Crossfire for now and my

"Crossfire for now and my go too. I bought this to get the receivers as I already had a module. Won’t hurt to have a spare."

— jeramy h. (5/5)

Crossfire products are top notch

"Crossfire products are top notch as always."

— Byron S. (5/5)

I like it!

"Good product for good mobey!"

— Denys V. (5/5)

Great product!

"Great product!"

— Sean E. (5/5)

Ok.

"Ok."

— Protas V. (5/5)

Communication

"I am new to your store The only reason I’m here is because of Fpv i’ve already bought him some stuff from you guys opened up an account but the only thing I don’t like is the way you communicate I’d rather talk over the phone either way thanks Steve"

— Steve. B. (4/5)

Crossfire nano

"Fairly simple to set up. Great range. Very compact. Have to use the computer link ti change settings!"

— Gary C. (5/5)

Well thought out combo kit,

"Well thought out combo kit, has everything you need to really extend the range of your quad. I love the fact they include both immortal L and immortal T antennas. There is even enough shrink tubing to do each rx two times, which is great for those of us who need the practice😀 The nano module fit perfectly in the radiomaster zorro I'm using, I needed to adjust the pin angle slightly but not a big deal. Of course the weather has turned for the worse (thx ida) but I will be pushing my micros to further thx to this kit. And big shout to Getfpv for the stickers🤙👊👊"

— Matthew C. (5/5)

Q&A

Does this tbs nano tx module use 2 watts of power to transmit at 100mW output ?
Yes
This will work with my tx16xmkII? is there a v2 also and what is the difference with micro version? thx
I purchased this a few months ago to learn it's not a direct fit. You will need an adapter for nano. I believe Micro is a direct fit to your tx16x.
Will this work with my QX7 ACCESS
You will need the micro version that fits in the module slot in that radio. Also you will have to install the circuit board chip provided in the kit inside the radio. Joshua Bardwell and others show you how to do this on YouTube. Lastly you’ll need a version of openTX and the SD card files to support crossfire (on open-rx.org). There are vids on that as well and it’s not hard to do the upgrade.
Is this compatible with frsky x9 lite?
Yes you only need to change the back plate for the for the one that comes in the starter set
Does the QX7S need to have the crossfire mod installed to use the crossfire nano?
I am not really sure on that but I hope anyone looking to buy a crossfire looks closely if what they need is the Micro or Nano. I made the mistake and now had to reorder the correct one. GetFPV customer service was awesome and understanding. It's just now another week before I can install it and use it.