Walk snail avatar, vtx
"Definitely a high quality unit. I'm definitely gonna be buying more in the future. The picture quality is awesome and the range is good also."
Details
Description
The Walksnail Avatar HD Nano Camera V3 / Avatar HD Mini VTX V3 features a nano digital camera, antenna, and mini VTX that works with HD goggles such as the Walksnail Avatar and Fat Shark HD Dominator. The Avatar V3 is the upgraded version of the Avatar 1S, where the V3 improves with 32G of storage, 500mW of power, a native 4:3 sensor, and a wide voltage range of 3.1-13V.
Check out all our Walksnail HD products and check out all our Walksnail compatible products!
Warning - Walksnail recommends that when using more than 2s power to use a standalone BEC in between the VTX and power source to conserve the integrity of sensitive electronics. Check out all our BECs and PDBs!
Features
- 3.1~13V
- 500mW
- FOV160°
- Metal case
- 1080P/60fps
- 4:3 native sensor
- Built-in 32G storage
- 18.5g light-weight
- Nano Camera 14x14mm
Walksnail Avatar HD Nano Kit V3
- The Walksnail Avatar HD Nano Kit V3 supports 1080P/60fps, with a 4:3 native sensor that provides smooth and stunning images. With this kit, you can capture flying footage with exceptional clarity and detail.
- Walksnail Avatar HD Nano Kit V3 is suitable for more drones, with 3.1-13V voltage input and 500mw power output, you'll be able to fly various kinds of drones with amazing video quality and range.
- Nano camera V3 with dimensions of 14*14cm and a weight of only 3g, equipped with a 2.1mm lens and 160° FOV, provides clearer and more realistic image quality.
- The Avatar VTX comes with 32g built-in storage, it can record 1080p HD and interference-free flight footage without adding an extra SD card and an action camera, reducing the overall weight of the drones and extending the flight time, allowing you to experience a more comfortable flight while recording 1080 HD videos.
- Canvas Mode: supporting Betaflight, kiss, Inav, Ardu full OSD display and customization, you'll be able to customize various OSD fonts, colors and patterns you like and easily adjust the parameters you want via remote control.
Q: Can I use analog channels?/Can I fly with other analog pilots?
A: Yes, when you upgrade the firmware to 34.40.15 version, need switch to racing mode.
Specifications
Camera
- Model: Avatar HD Nano Camera V3
- Image Sensor: 1/3.2-Inch 4Mp 4:3 sensor
- Resolution: 1080P/60fps,720P/120fps,720P/60fps
- Ratio: 4:3 native / 16:9
- Lens: 2.1mm
- FOV: 160°
- Aperture: F2.0
- Shutter: Rolling Shutter
- Min.Illumination: 0.001Lux
- Weight: 3g （without cable）
- Dimensions: 14x14x16.8mm
- Coaxial Cable: 90mm(default)/140mm
VTX
- Model Avatar HD Mini VTX V3
- Communication Frequency 5.725-5.850GHz
- Transmitter Power (EIRP) FCC:<27dBm;CE:<14dBm;SRRC:<20dBm;
- MIC:<25dBm
- I/O Interface JST1.0x4(Power in)JST0.8x4(USB)
- Mounting Holes 25.5x25.5mm(M2 hole);20x20mm(M3 hole)
- Dimensions 31.5x31.5x9.4mm
- Storage 32G
- Recording 1080p/720p
- Weight 13.4g
- Operating Temperature -20-40℃
- Channels 8
- Wide Power Input 3.1V-13V
- Supported FC System Betaflight; Inav; Fettec; Kiss; ArduPliot
- OSD Canvas mode
- Latency Average latency 22ms
- Antenna 1(IPEX)
VTX Antenna
- Model: Avatar V2 antenna
- Polarization: LHCP
- Bandwidth: 5600MHz-6000MHz
- Average Gain: 1.9dBi
- VSWR: ≤1.5
- Interface: IPEX-1
- Line Length: 105mm
- Dimension: R15x45mm(without cable)
- Weight: 2g
Includes
- 1x Walksnail Avatar HD Nano V3 VTX Kit w/ Nano Camera
- 1x 4 Pin USB Cable
- 1x 4 Pin Power Cable
- 2x M2x4/5/6mm Screws
- 4x M2x14mm Screws
- 4x M2x5x0.5mm washer
- 5x 2.1x3.4x1mm Gasket
- 1x 14 to19mm bracket
More Info
- SKU: 21126
- Barcode: 6910236001112