• DIATONE Hardware Diatone Mamba Interferance Isolation Board V2 - 20x20 and 30x30
1 1

Diatone Mamba Interferance Isolation Board V2 - 20x20 and 30x30

Diatone Mamba Interferance Isolation Board V2 - 20x20 and 30x30

$2.99
$2.99
Add To Wishlist
View full details

Details

Description

Pack of 2 interference isolation shields for 20x20 and 30x30 stacks. Place this in your stack between your FC and 4in1 ESC, and solder one of the several ground tabs to your FC ground. It helps to isolated your flight controller's inductors from EM noise generated by your 4in1.     

We also carry adhesive copper EMF shielding tape for the same purpose. 

Check out our stack hardware and FC accessories and all our Diatone gear!

Specifications

  • Weight: >1g ea.

Includes

  • 1x Diatone Mamba 20x20 Interference Shielding Isolation Board
  • 1x Diatone Mamba 30x30 Interference Shielding Isolation Board

More Info

  • SKU: 11014
  • Barcode: 691023525344
 

Overall rating: 4.6875 / 5 from 32 reviews.

AI Generated Review Summary

Summary topics

Review topics: ["weight","looks","works","insurance","pads","noise"].

Review highlights

Reviews

Stock up, very useful

"Go ahead and buy about 5 of these. Ground terminal to solder to, and keeps ur strap from hanging up on fc"

— Jason W. (5/5)

Just in case..

"Thin and easy to apply."

— John F. (5/5)

Great insurance

"Best thing to do is try it with and without, great little insurance to stop problems"

— Mike L. (4/5)

You need this!

"A simple way to eliminate interference in your stack."

— Jim P. (5/5)

Reduces gyro noise

"On noisy ESC this reduces gyro noise bigtime. And it's cheap so why not give it a try? You can also build these with copper tape but these just look better."

— Dinesh W. (5/5)

Decent solution for interference and

"Decent solution for interference and noise."

— Eric Y. (5/5)

Actually works

"Super thin but effective shielding for slam builds"

— Matthew K. (5/5)

Works great

"Had some of these before and they definitely make a difference. Great product"

— Adis H. (5/5)

"Great deal"

— Marcio (5/5)

They fit

"To be determined. They fit. As long as they don't short anything."

— jeff p. (5/5)

Q&A

Where do I install this shield on my esc+fc+vtx/rx stack?
Install above ecs in stack
which side should be facing FC? Should this shield be in contact with CF?
Thanks for your questions! this can face either way, but the pads on it are conductive, so be careful with mounting