• DIATONE AIO FC Diatone Mamba MK4 F740 3-6S AIO Whoop/Toothpick Flight Controller w/ 40A 32Bit 4in1 ESC - WIFI
  • DIATONE AIO FC Diatone Mamba MK4 F740 3-6S AIO Whoop/Toothpick Flight Controller w/ 40A 32Bit 4in1 ESC - WIFI
  • DIATONE AIO FC Diatone Mamba MK4 F740 3-6S AIO Whoop/Toothpick Flight Controller w/ 40A 32Bit 4in1 ESC - WIFI
1 3

Diatone Mamba MK4 F740 3-6S AIO Whoop/Toothpick Flight Controller w/ 40A 32Bit 4in1 ESC - WIFI

Diatone Mamba MK4 F740 3-6S AIO Whoop/Toothpick Flight Controller w/ 40A 32Bit 4in1 ESC - WIFI

$115.99
$115.99
Add To Wishlist
View full details

Details

Description

Now this is something truly special for its size and capability - Introducing the Diatone Mamba MK4 F740 AIO. The Diatone Mamba MK4 F740 AIO is a powerful, all-in-one flight controller and ESC for sub 250g 3, 4, and 5 inch quads. It is equipped with an F7 processor, a 32bit 4in1 ESC of up to 40A, a barometer and OSD chip, and 16M of Blackbox memory. Connecting a video transmitter is easy and efficient, giving you a reliable and versatile system.

Check out all our Whoop/AIO Flight Controllers and our full Diatone collection!.

FC Specifications

  • Target: MAMBA F722_2022B
  • MCU: 216MHz STM32F722
  • GYRO: ICM-42688-P
  • Barometer: Yes
  • OSD: Yes
  • Blacbox: 16MB Flash
  • Uarts: 6 Set
  • Motor Signal: 4 Set
  • ESC Soft: Dshot300/600
  • ESC Telemetry: Yes
  • Power Led: Yes
  • LED Controller: BF LED
  • AIR UNIT Port: Yes
  • WIFI: No
  • F.Port: Yes
  • RSSI: No
  • Buzz: Yes
  • Input: 3~6S Lipo (12.6~25.2V)
  • BEC Protection: Yes
  • Receiver Protection: Yes
  • TVS Protection: Yes
  • BEC: 3.3V 0.5A & 5V 2A
  • Mounting size: 25.5 x 25.5mm/M2

ESC Specifications

  • Input: 3~6S Lipo (12.6~25.2V)
  • Continue Current: 40Ax4
  • Burst current: 45A (10 Seconds)
  • Target：BLHeli_32 MAMBA F40_128K
  • SOFT: Dshot300/600
  • PWM:24~128K

Include

  • 1x Diatone Mamba MK4 F740 3-6S AIO Whoop/Toothpick Flight Controller w/ 40A 32bit 4in1 ESC - WIFI
  • 1x High Frequency 470uF/35V
  • 1x AIR UNIT sh1.0
  • 1x 16AWG 60mm
  • 1x AMASS Original XT60

Wiring Diagram 

More Info

  • SKU: 20076
  • Barcode: 691023514003
 

Overall rating: 3.3333333 / 5 from 6 reviews.

AI Generated Review Summary

Summary topics

Review topics: ["issues"].

Review highlights

Reviews

Works like a charm

"I set it up to work with the Tanq S by LetsFlyRC as per specs. and it just works beautifully. Very happy with this stack."

— Eduardo E. (5/5)

Great AIO

"Pads are easy to solder to and not too small. Flies a 4in great."

— Keith Alexander .. (5/5)

Be gentle

"This fc has a fpc cable that is very close to the main solder pads so do not oner heat it or remove the connection from the bottom board first. Also I don't recommend leaving it plugged in two long. I had two go down in flight from a shorted fpc cable joining the top plate to the bottom. Great board of you get past this point. I recommend the basic but had a light 4S battery eject and snatched the ground pad of of it so strap that main wire down. Diatone and rdq did help with the issue."

— Chris C. (2/5)

"Not good. I had it on a TinyTrainer and literally armed the quad, it touched a blade of grass and completely failed. Never again."

— LaQuaunn (2/5)

No problems

"No issues, i need another one (I) broke my drone so time for a new build"

— James (5/5)

Disappointed

"I bought this AOI a week ago but only got it in the air today. I got it for my TinyTrainer thinking 40a esc wouldn't blow with it being rated 3-6s. I was sadly mistaken. I got 10 whole packs in before it blew out. All 4 esc are done. It won't even chime when I plug in. When I armed it the last time a prop rubbed the ground and that did it. Given the cost of everything going up this is pathetic. Over $100 you get 10 whole flights and its done. I'll go back to the cheaper better Tunerc AOI."

— Quaunn (1/5)

Q&A