• IFLIGHT Stack iFlight Blitz F7 V1.2 2-6S 30x30 Stack/Combo (F7 FC/ E55 32Bit 55A 4in1 ESC)
  • IFLIGHT Stack iFlight Blitz F7 V1.2 2-6S 30x30 Stack/Combo (F7 FC/ E55 32Bit 55A 4in1 ESC)
  • IFLIGHT Stack iFlight Blitz F7 V1.2 2-6S 30x30 Stack/Combo (F7 FC/ E55 32Bit 55A 4in1 ESC)
  • IFLIGHT Stack iFlight Blitz F7 V1.2 2-6S 30x30 Stack/Combo (F7 FC/ E55 32Bit 55A 4in1 ESC)
  • IFLIGHT Stack iFlight Blitz F7 V1.2 2-6S 30x30 Stack/Combo (F7 FC/ E55 32Bit 55A 4in1 ESC)
  • IFLIGHT Stack iFlight Blitz F7 V1.2 2-6S 30x30 Stack/Combo (F7 FC/ E55 32Bit 55A 4in1 ESC)
  • IFLIGHT Stack iFlight Blitz F7 V1.2 2-6S 30x30 Stack/Combo (F7 FC/ E55 32Bit 55A 4in1 ESC)
  • IFLIGHT Stack iFlight Blitz F7 V1.2 2-6S 30x30 Stack/Combo (F7 FC/ E55 32Bit 55A 4in1 ESC)
1 8

iFlight Blitz F7 V1.2 2-6S 30x30 Stack/Combo (F7 FC/ E55 32Bit 55A 4in1 ESC)

iFlight Blitz F7 V1.2 2-6S 30x30 Stack/Combo (F7 FC/ E55 32Bit 55A 4in1 ESC)

$155.99
$155.99
In stock
In stock
Add To Wishlist
View full details

Details

Description

The V1.2 of the iFlight Blitz F7 E55 2-6S 30x30 Stack/Combo has arrived. These new flight controllers are equipped with a plug and play connectors making connecting your video transmitter, radio receiver, and other periphery sensors a breeze.

They also make diagnosing issues in the field much easier with status indicator LED's that let you know in seconds if you are having a problem with the 3.3V, 5V, or VBat. Coupled with iFlight's new 55 Amp BLHeli_32 Blitz 4-in-1 ESC, this stack can handle even the most amp hungry motors.

Check out our other 30x30 Stacks & Combos as well as our entire iFlight selection!

Features

  • Improved circuit design, better components and lower electrical noise!
  • DJI HD VTX Connector (Plug-and-Play / No soldering required)
  • FC indicator LEDs for visual debugging
  • With LC filter

Specification

Jan. 12, 2024: Gyroscope changed from BMI270 to ICM42688. Product name updated to BLITZ F7 V1.2 Flight Controller.

Blitz F7 V1.2

  • MCU: STM32 F722
  • Gyro: ICM42688
  • Barometer: DPS310
  • OSD Chip: AT7456E
  • Flash: 32MB (Blackbox flash)
  • UARTS: 6
  • Motor outputs: 4x (SH1.0 connector)
  • I2C serial: SDA / SLA pads
  • Smartaudio / IRC Tramp VTX protocol supported
  • LED controller: Yes
  • Beeper pad: Yes
  • Firmware target: IFRC-IFLIGHT_BLITZ_F722
  • Mount pattern: 30.5x30.5mm / 4mm PCB hole diameter
  • Dimensions: 36.5x35 mm
  • Weight: 7.8g
  • BEC: 5V 2.5A / 9V 2A

E55 4in1 ESC

  • Input Voltage: 2-6S
  • Max. Continuous Current: 55A
  • Max. Burst Current: 65A 
  • MCU: G071
  • BEC: No
  • Firmware: BLHeli32
  • Current Sensor: Yes
  • Target: IFLIGHT_BLITZ_G2
  • Mounting Dimensions: 30.5x30.5mm/Φ4mm
  • Dimensions: 35x42mm
  • Weight: 15.3g

Includes

  • 1x iFlight Blitz F7 V1.2 2-6S 30x30 Stack/Combo (F7 FC/ E55 32Bit 55A 4in1 ESC)
  • 1x XT60 Pigtail

More Info

  • SKU: 18166
  • Barcode: 6910236005530
 

Overall rating: 5.0 / 5 from 4 reviews.

AI Generated Review Summary

Summary topics

Review topics: [].

Review highlights

Reviews

😡 Stuck in shipping

"I would love to review but unfortunately I've yet to receive any of the order. Sorry I choose free shipping. I expect great things as the typical quality from I Flight and Emax have been great. Quad is built and waiting...."

— Ty F. (5/5)

hi

"nice"

— fahad m. (5/5)

Works exactly as it should

"Works exactly as it should"

— John F. (5/5)

Nice

"First off the compactor was pre installed which was nice, that leads to the wires being on the bottom. This can be good and bad, good for space, but for me to wire is now blocking the back vtx mount, not much of a problem as I just stacked it. It’s also nice that the motor connections are diagonal and sticking out, making it so you can replace a motor without taking part my drone. I come from a cheap one so it is also nice to have a plug in camera port, worked fine with beta flight."

— Spencer (5/5)

Q&A

i ordered a nazgul evoque frame for my build and saw it recommends the blitz iflight stack. say it recommends 20x20 size stack but i want to put in a 30x30
The Nazgul Evoque F5 frame is really designed around the 20x20 Blitz Mini F7 stack. While you CAN put a 30x30 in it (I tried at first, too), or even another 20x20, I can only recommend you stick with the suggested stack for this frame. Otherwise, the sideplates will not fit, the motor wires will not align with the side plate clearance holes (even with another 20x20 stack) and you'll just have difficulty with it. You won't be happy with a 30x30 in the F5 frame. Additionally, the port cutouts won't align with any other FC. I ripped the 30x30 I had in and replaced it with the recommended stack. I'm MUCH happier with it now. You will be, too! I used 2306 1750kv motors (https://www.getfpv.com/lumenier-2306-johnnyfpv-cinematic-v2-motor-1750kv-2250kv-2550kv.html). Flies beautifully on 4s and 6s both. 4s 2000Mah seems to be the sweet spot for me on this one without a GoPro.