GEPRC F722 2-6S F7 AIO w/ 45A 8-bit ESC
We are glad to introduce a new member of GEPRC FC AIO, the GEP-F722-45A AIO. The F722 AIO adopts MCU STM32F722, which has a powerful performance and higher computing speeds. It has 5 full UART ports and can connect more external devices.
We designed a 6-pin connector for the DJI air unit VTX plug-and-play. The BLheili_S 45A ESC can handle 45A continuous current (55A burst), supports the 2-6S lipo battery, and brings the drone a stronger flight performance. It can support OSD parameter adjustment, buzzer, led, and other functions.
It is 8.8g, ultra-lightweight, and has a 25.5mm x 25.5mm mounting hole, suitable for most of the frames on the market. GEPRC pursues lighter weight, smaller volume, more functions, and better performance from their flight controllers.
- MCU: STM32F722, with strong performance and higher computing speed.
- It has 5 full UART ports, which can connect more external devices
- Designed with a 6-pin connector for DJI AIR UNIT MODULE, and just plug and play.
- The BLheili_S 45A ESC can handle 45A continuous current (55A burst) and supports the 2-6S lipo battery.
- Support OSD parameter adjustment, buzzer, led, and other functions.
- 8g ultra lightweight
- 25mm x 25.5mm mounting hole, suitable for most frames
GEPRC F722 AIO
- Model Name: GEP-F722-45A AIO
- MCU: STM32F722
- IMU: 42688 gyro/accelerometer(SPI)
- Firmware target: GEPRC_F722_AIO
- OSD: Betaflight OSD w/ AT7456Ev
- UART Ports: R1 T1 / R2 T2 / R3 T3 / R4 T4 / R5 T5
- Beeper: YES
- LED: YES
- USB: Micro USB
- BEC output: 5V@1A
- Integrated LC Filter
- ESC MCU: 8BB21F16G
- Continuous current: 45A
- MAX current: 55A (10s)
- Input: 2~6S
- Supports: Dshot600, Oneshot, Multishot
- BlackBox: 16Mb
- Target: G_H_30
- Size: 32x32mm Board
- Mounting Hole: 25.5×25.5mm
- Weight: 8.8g
- 1 x GEP-F722-45A AIO
- 1 x XT30-7CM-18AWG Power cables
- 1 x 35V220UF capacitor
- 1 x SH1.0-6Pin to GH1.25-8Pin cables
- 8 x M2*6.5mm Damping rings