• HAKRC AIO FC HAKRC F722 2-6S AIO Whoop/Toothpick Flight Controller w/ 8Bit 40A ESC & External USB Board
  • HAKRC AIO FC HAKRC F722 2-6S AIO Whoop/Toothpick Flight Controller w/ 8Bit 40A ESC & External USB Board
  • HAKRC AIO FC HAKRC F722 2-6S AIO Whoop/Toothpick Flight Controller w/ 8Bit 40A ESC & External USB Board
  • HAKRC AIO FC HAKRC F722 2-6S AIO Whoop/Toothpick Flight Controller w/ 8Bit 40A ESC & External USB Board
1 4

HAKRC F722 2-6S AIO Whoop/Toothpick Flight Controller w/ 8Bit 40A ESC & External USB Board

HAKRC F722 2-6S AIO Whoop/Toothpick Flight Controller w/ 8Bit 40A ESC & External USB Board

$92.49
$92.49
Add To Wishlist
View full details

Details

Description

HAKRC bring us another serious contender in whoop sized AIO boards. With an F722 flight controller and 40 Amp ESC on board, this AIO is sure to keep even the most powerful quads flying well. This AIO also features both internal and external USB.

Check out our other AIO boards and maybe even some nice motors to finish off your build.

Features

  • The PCB adopts high-end 8-layer 2oZ thick copper skin, which has stronger over-current capability and good heat dissipation
  • MOS adopts imported 40V high current resistance MOS, long life and strong load capacity
  • Industrial grade LDO, high temperature resistance
  • High-quality Japanese Murata capacitors, strong filtering performance
  • Internal and External USB


Specifications

Flight Controller

  • Input Voltage: 2S-6S
  • MCU: STM32F722RET6
  • IMU: MPU6000
  • OSD: AT7456E
  • UARTs: 5
  • Flight control firmware version: HAKRC F722D
  • BEC: 5V/3A
  • Sensor: Built-in current sensor
  • Barometer: integrated
  • LED: Support WS2812 and other programmable
  • Compatible receivers: CRSF / Frsky/ Futaba/ Flysky/
    TBS Crossfire/ DSMX: DSM2 receiver
  • Dimensions: 32x32mm (25.5mm-26.5mm mounting hole)

ESC

  • Input voltage: 2S-6S
  • Continuous current: 40A
  • Peak current: 50A
  • Firmware version: BLHELI _S (G- H-30)
  • Current meter proportional value: 450
  • Protocol support: PWM, Oneshot125, Oneshot42,
    Multishot, Dshot150, Dshot300, Dshot600


Includes

  • 1x HAKRC F722 AIO Whoop/Toothpick Flight Controller w/ 2-6S 8Bit 40A ESC
  • 1x XT30 power cord
  • 1x Type-C USB small board
  • 1x SH1.0/7P single-head cable
  • 1x 270uf/35V capacitor
  • 4x Yellow shock-absorbing balls


Wiring Diagram

HAKRC F722 40A AIO

More Info

  • SKU: 17728
  • Barcode: 691023527904
 

Overall rating: 4.4761906 / 5 from 21 reviews.

AI Generated Review Summary

Summary topics

Review topics: ["board","esc"].

Review highlights

Reviews

Envoie rapide et soigner

"Envoie rapide et soigner"

— guillaume s. (5/5)

HAKRC AIO

"Works as it should, have about 10 flights so far."

— JODY T. (5/5)

Awesome little board

"Love this little bored, thought I would have some problems with the Gyro but all good to go."

— Jorg P. (5/5)

HAKRC AIO Board

"Great board, Getfpv fast shipping!"

— CARLOS C. (5/5)

So far so good.

"This was purchased to update the flight electronics in a Blade Torrent 110. This is my first ever attempt at installing and tuning an AIO in a drone, so I don't think I have any useful specifics. Seems to be working well so far. Between this AIO and the motors I chose for the build, the airframe seems to have gotten a major upgrade in power!"

— Aaron B. (4/5)

One little issue

"This seems to be a pretty good FC. Only issue I have is I cannot get the esc calibrated. It always has a double tone. It could possibly have something to do with the msp from the walksnail set up. But I've unplugged it and attempted calibration. Didn't think that needed to be done with D shot but just cannot stop the sound."

— Christopher C. (4/5)

Totally Worth It!

"I needed something smaller than a “stack” for the application I was using because space was extremely limited so I took a chance and it works perfectly! For a 25.5mm, these pads I found to be easy to solder to and the layout was spot on."

— Dave O. (5/5)

Affordable

"Great specs for its price"

— Kevin G. (5/5)

Works great in a 4s Holodonata

"Great F7 AIO. Everything you could want with plenty of uarts"

— Ryan R. (5/5)

Solder pads are not to

"Solder pads are not to small. Lots of features in a small package"

— Chad P. (5/5)

Q&A

this can use a 6s with DJI O3 connected ?
It can take 6s, dji I am unsure.
connected to Betaflight to update to version 4.4 and this show up: Configurator has detected the board: HAKRC F722D but no official Betaflight target was found, there's another one named HAKRCF722D, but there's a mini fc also named HAKRC F722D, so im not sure I can update, does anyone know?
The automaticly detakted firmaware and board versions in betaflight 4.4 worked for me. HAKRCF22D and betaflight 4.4.0 {29-jan-2023}