Skip to content

HappyModel BNF Mobula6 1S Analog Whoop (SPI FrSky) - Choose Kv

Original price $102.99 - Original price $102.99
Original price
$102.99
$102.99 - $102.99
Current price $102.99
In Stock
Pre Order
Coming Soon
Kv: 19000 Kv (Standard)
Free Delivery on U.S.A. Orders $99 or more

Add To Wishlist

The Mobula6 Micro FPV Whoop features the Runcam Nano3, Onboard Frsky Receiver, 5A BLheli_S 4-in-1 ESC, and more! This mini and lightweight whoop (65mm) will take you hard-to-get places!

Pick a motor: Race (25000Kv) or Standard (19000Kv).

Check out our other pre-built quads, as well as the rest of our HappyModel selection!

 Features

  • AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTX
  • Extreme light 1S 65mm Brushless whoop only 20g
  • Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera
  • Smooth and powerful
  • Compatible with 1S Lipo/LIHV
  • Camera Angle adjustable

Specifications

  • Brand Name: Happymodel
  • Item Name: Mobula6 1S 65mm Brushless whoop drone BNF version
  • Wheelbase: 65mm
  • Size: 80mmx80mmx37mm
  • Weight: 20g
  • Receiver option:
  • Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)
  • Motor speed option:
  • SE0802 KV25000(Race Edition)
  • SE0802 KV19000(Regular Edition)

Motors

  • Model: SE0802 19000KV or KV25000
  • Configuration:9N12P
  • Stator Diameter:8mm
  • Stator Length:2mm
  • Shaft Diameter: Φ1mm
  • Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
  • Weight(g):1.9g
  • No.of Cells(Lipo):1S only

Propellers

  • Gemfan 1219-3
  • Center Thickness:5mm
  • Prop Disk Diameter:31mm
  • Center Hole Inner diameter:1.0mm
  • Weight:0.28g

Flight controller

  • (Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR
  • MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
  • Sensor: ICM42688P
  • Board size: 28.5x28.5MM
  • Power supply: 1S battery input (DC 2.9V-4.35V)
  • Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Built-in Betaflight OSD(SPI Control)
  • Built-in 5.8G VTX
  • Built-in SPI Frsky/Flysky receiver
  • Built-in 5V 1A BEC
  • Built-in voltage detection

Onboard 4in1 ESC

  • MCU upgraded to ICM42688P
  • Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: O_H_5_REV16_7.HEX
  • Default protocol: DSHOT600

Onboard Frsky SPI D8 receiver Version

  • SPI BUS receiver Frsky D8 compatible
  • Compatible Non-EU transmitter D8 modelChannels: 8ch
  • Failsafe support
  • No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m

    Onboard 5.8g VTX

    • Output power: 25mw
    • Frequency: 40CH
    • Input voltage: 3.3V 5.5V
    • Current consumption: 300mA(type)
    • Frequency: 5.8GHz 5bands 40 channels
    • With Race bandSmartaudio ready

    Runcam Nano3

    • Model: RunCam Nano 3
    • Image Sensor: 1/3″ CMOS
    • Horizontal Resolution: 800TVL
    • Lens : 2.1mm(M8) FOV 160°
    • Signal System: NTSC
    • S/N Ratio: >50dBElectronic Shutter Speed: Auto
    • Auto Gain Control (AGC): Auto
    • Min. Illumination: 0.01Lux@1.2F
    • D-WDR: Auto
    • Day/Night: Color
    • Power: DC 3-5.5V
    • Current: 110mA@5V 120mA@3.3V
    • Housing Material: ABS
    • Net Weight: 1.2g
    • Dimensions: L14mmxW14mmxH9mm

    Lipo Battery

    • Capacity:300mAh
    • Voltage:3.8v
    • Continuous Discharge Rate: 30C
    • Size: 57mmx12mmx7mm
    • Weight: 8gConnector: PH2.0

    Includes

    • 1x Mobula6 1S 65mm whoop Drone Frame 
    • 1x SPI Receiver: Crazybee F4 Lite FC built-in Frsky SPI D8 RX 
    • 4x SE0802 KV19000 or KV25000 brushless motor 
    • 1x Gemfan 1219-3 Propellers(4cw+4ccw) 
    • 1x Runcam Nano3 1/3 CMOS 800TVL camera 
    • 1x 5.8G 25mw 40ch VTX (Flight controller built-in) 
    • 4x 1S 300mah 30C LiHV Battery 
    • 1x 1S Lipo/LIHV USB Charger 
    • 1x Propeller disassemble tool
    >