• HAPPYMODEL Quad (PRE-ORDER) HappyModel BNF Mobula8 1-2S HD 85mm Whoop w/ DJI O3 Air Unit & Micro Cam - ELRS 2.4GHz
  • HAPPYMODEL Quad (PRE-ORDER) HappyModel BNF Mobula8 1-2S HD 85mm Whoop w/ DJI O3 Air Unit & Micro Cam - ELRS 2.4GHz
1 2

HappyModel BNF Mobula8 1-2S HD 85mm Whoop w/ DJI O3 Air Unit & Micro Cam - ELRS 2.4GHz

HappyModel BNF Mobula8 1-2S HD 85mm Whoop w/ DJI O3 Air Unit & Micro Cam - ELRS 2.4GHz

$464.49
$464.49
Add To Wishlist
View full details

Details

Description

Experience powerful performance with the HappyModel BNF Mobula8 1-2S HD 85mm! This amazing quadcopter comes with an amazing DJI O3 Air Unit and Micro Cam, as well as Crazy F405 ELRS HD flight controller, EX1103 11000Kv motors, and Gemfan Hurricane 2023 tri-blade propellers for superior power performance. Get the perfect HD experience with the Mobula8! 

Be sure to check out all our pre-built quads, and all our Happymodel products!

Specifications

  • Camera/VTX: DJI O3 Air Unit
  • Item Name: Mobula8 1-2S 85mm Micro FPV whoop drone
  • Size: 120mmx120mmx50mm
  • Brand Name: Happymodel
  • Wheelbase: 85mm

FLIGHT CONTROLLER

  • Built-in voltage meter sensor, voltage meter scale 110
  • Built-in current meter sensor, current meter scale 470
  • MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
  • Power supply: 1-2S battery input (DC 2.9V-8.7V)
  • GYRO Sensor: BMI270  (SPI connection)
  • Built-in 12A(each) Blheli_S 4in1 ESC
  • Mount hole size: 25.5mm x 25.5mm
  • Built-in Serial ExpressLRS 2.4G
  • Model: Crazy F405 ELRS HD
  • Built-in BMP280 Barometer
  • Built-in 8MBp black box

ONBOARD UART ELRS 2.4GHZ RECEIVER

  • Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
  • Could update firmware via ExpressLRS configurator
  • Antenna: enameled copper wire 31mm length
  • Default firmware version: ExpressLRS V3.0.1
  • Firmware target: HappyModel EP 2400 RX
  • Telemetry output Power: <12dBm
  • RF Frequency: 2.4GHz

ONBOARD 4-IN-1 ESC

  • Current: 12A continuous peak 15A (3 seconds)
  • Factory firmware: Bluejay ESC V0.19
  • Support BLHeli_S Bluejay firmware
  • Power supply: 1-2S LiPo/LiPo HV
  • Default protocol: DSHOT300
  • Firmware target: Z-H-30

MOTORS

  • Motor Dimension(Dia.xLen):Φ13.5mmx15.5mm
  • Mode: EX1103 11000Kv
  • Shaft Diameter:Φ1.5mm
  • No.of Cells(Lipo):1-2S
  • Configu-ration:9N12P
  • Stator Diamter:11mm
  • Stator Length:3mm
  • Weight(g):3.8g

PROPELLERS

  • Center Hole Dia:1.5mm
  • Center Thickness:5mm
  • Props Dia:52.17mm
  • Weight:0.88g
  • Pitch:2.3inch
  • Material: PC

Includes

  • 1x HappyModel BNF Mobula8 1-2S HD 85mm w/ DJI O3 Air Unit & Micro Cam - ELRS 2.4GHz

More Info

  • SKU: 20895
  • Barcode: 691023532412
 

Overall rating: 5.0 / 5 from 4 reviews.

AI Generated Review Summary

Summary topics

Review topics: ["quad"].

Review highlights

Reviews

Love it

"Fly it anywhere.. good build quality. Locktite ..... u need it. Elrs is super easy to setup."

— Lee D. (5/5)

Fun little quad

"I love this little quad. I fly it around the house both inside and out. Nice to add to the collection"

— jason s. (5/5)

it happened again

"HappyModel has done it once again has welcomed another creation into our hearts. Stripped 11grams off with a naked kit(lite), added thin camera-gummies, and flatted the throttle(a little) at hover point, its a carpenter bee. precision where ya need it! wind doesnt really bother it... weights are 98g with hv450, and 100g with hv550gnb(red)."

— Jason W. (5/5)

Tinywhoops with 03 clarity is awesome

"Really cool to have the 03 air unit in a 85mm frame. You can definitely feel the weight when flying, but it still performs well once you get used to the throttle input it needs for different maneuvers. The GNB 550mah 2s batteries fit perfectly."

— Nick D. (5/5)

Q&A