• HAPPYMODEL AIO FC FRSKY D8 HappyModel Crazybee F4 Lite 1S Whoop Flight Controller for Mobula6 - Choose Your RX
  • HAPPYMODEL AIO FC FRSKY D8 HappyModel Crazybee F4 Lite 1S Whoop Flight Controller for Mobula6 - Choose Your RX
1 2

HappyModel Crazybee F4 Lite 1S Whoop Flight Controller for Mobula6 - Choose Your RX

HappyModel Crazybee F4 Lite 1S Whoop Flight Controller for Mobula6 - Choose Your RX

$77.99
$77.99
Receiver:
In stock
In stock
Add To Wishlist
View full details

Details

Description

Spare replacement Flight Controller for the Happymodel Mobula 6, and an all around incredible little TRUE AIO for any 1S brushless build! 

Check out all our Whoop FCs, our Mobula 6 parts selection, and all Happymodel products!

    Specifications

    Flight Controller

    • (Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR
    • (Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS
    • MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
    • Sensor: MPU-6000(SPI connection)
    • Board size: 28.5 * 28.5MM
    • Power supply: 1S battery input (DC 2.9V-4.35V)
    • Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
    • Built-in Betaflight OSD(SPI Control)
    • Built-in 5.8G VTX
    • Built-in SPI Frsky/Flysky receiver
    • Built-in 5V 1A BEC
    • Built-in voltage detection

    Onboard 4in1 ESC

    • MCU upgraded to EFM8BB21
    • Power supply: 1S LiPo/LiPo HV
    • Current: 5A continuous peak 6A (3 seconds)
    • Support BLHeliSuite programmable
    • Factory firmware: O_H_5_REV16_7.HEX
    • Default protocol: DSHOT600

    Onboard FrSky SPI D8 Receiver Version

    • SPI BUS receiver Frsky D8 compatible
    • Compatible Non EU transmitter D8 model
    • Channels: 8ch
    • Failsafe support
    • No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m

    Onboard FlySky SPI Receiver Version

    • SPI BUS receiver
    • Protocol: AFHDS and AFHDS-2A Switchable
    • Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
    • Failsafe support
    • No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m

    Onboard 5.8GHz VTX

    • Output power: 25mw
    • Frequency: 40CH
    • Input voltage: 3.3V 5.5V
    • Current consumption: 300mA(type)
    • Frequency: 5.8GHz 5bands 40 channels
    • With Race band
    • Smartaudio ready 

    Includes

    • 1x HappyModel Crazybee F4 Lite 1S Whoop Flight Controller - Choose Your RX

    More Info

    • SKU: 13174
    • Barcode: 691023492509
     

    Overall rating: 4.3174605 / 5 from 63 reviews.

    AI Generated Review Summary

    The HappyModel Crazybee F4 Lite 1S Whoop Flight Controller is praised for its solid build and functionality, making it a great option for micro or lightweight builds. It is also noted for being a reliable replacement for the Mob6 with plug-and-play motors. However, opinions on the range and VTX performance vary among customers.

    Summary topics

    • Range: 17%
    • All-In-One Build: 11%
    • Board Build Quality: 29%
    • Replacement Compatibility: 13%

    Review topics: ["shipping","replacement","control","issues","works","buy","board","range","aio","vtx","receiver","repairs","reason","whoop","version","lite"].

    Review highlights

    • "Board looks great and comes with all necessary hardware to install (Screws and rubber grommets)." — Christian A.
    • "The range and quality is good enough for around the house." — Wesley M.
    • "Good replacement, super fast delivery" — jaden d.

    Reviews

    Crazy Bee

    "Excellent A grade flight controller"

    — Graham P. (5/5)

    i ordered thi FC as

    "i ordered thi FC as a spare part, is know it will perform perfectly when i need it."

    — richard m. (5/5)

    Solid fc

    "Ordered 2 and they work great, considering ordering more since it’s so hard to find a 1s reliable fc"

    — DavidFPV (5/5)

    Flashed the updated Beta flight

    "Flashed the updated Beta flight version to the FC and soldered on a Newbeedrone Beeeye camera. I installed it on to a 65mm frame and it flies very great. Good value for the money."

    — MICHAEL A. (5/5)

    Crazybee F4 lite

    "Get FPV is awesome ordered on Friday night received in California on Monday.My go to whoop flight controller"

    — Mike T. (5/5)

    Great AIO board for whoops

    "This is a drop in replacement for the original AIO for my Mobula 6. Works well, and I have also used it in other custom tiny whoop builds. One thing to note is that in D16 mode, I found that the range is very poor. In D8 mode, I get at least 200 yards if I have direct line of sight, and I can make it around my house without a failsafe (although RSSI dips down into the 30's)."

    — Donald S. (5/5)

    Lite is rite

    "The internal vtx is lightweight and works fine for close range and most whoop races, but would need an external vtx for outdoor flying."

    — jonathan s. (4/5)

    Good whoop board

    "Good replacement, super fast delivery"

    — jaden d. (5/5)

    Good

    "Good"

    — Anthony M. (5/5)

    Awesome 1 s board

    "Awesome little board only complaint is the Spectrum receiver is not built into the board but I built a 1s, 75 mm pusher whoop using this! Great range VTX Works fantastic I'm very pleased"

    — Christopher B. (5/5)

    Q&A

    Does that requires any soldering?
    Yes
    Does your current stock of happymodel f4 lite fc’s still use the MPU-6000? If so I’m definitely getting a few.
    Sorry , no recollection
    Does the dsmx version really not include the receiver?
    This is correct, it does not include the receiver.
    I know you mentioned in another reply the FrSky receiver version coming in in 2 weeks - but do you have a rough date? Not sure when that other post was made
    We ordered them 3 days ago and the shipment takes about 2 weeks. 6/23/20
    When will the frsky reciever version come in stock?
    Approximately 2 weeks.