• MATEK FC Matek F405-TE 30x30 Flight Controller w/ Built-in PDB
  • MATEK FC Matek F405-TE 30x30 Flight Controller w/ Built-in PDB
  • MATEK FC Matek F405-TE 30x30 Flight Controller w/ Built-in PDB
  • MATEK FC Matek F405-TE 30x30 Flight Controller w/ Built-in PDB
  • MATEK FC Matek F405-TE 30x30 Flight Controller w/ Built-in PDB
1 5

Matek F405-TE 30x30 Flight Controller w/ Built-in PDB

Matek F405-TE 30x30 Flight Controller w/ Built-in PDB

$80.49
$80.49
Add To Wishlist
View full details

Details

Description

Another feature rich offering from Matek in the 30x30 class. Loaded with features for digital and analog builds. Matek leads the pack when it comes to quality and performance.  This flight controller is great for anyone wanting to run 4 individual ESCs due to its built-in PDB.

Check out our 30x30 Flight Controllers as well as the entire Matek selection!

Features

The MATEKSYS F405-TE Flight Controller features a 30.5 x 30.5mm mounting pattern and weighs 10g. It features a Barometer, Micro SD Slot, 6x UARTS, 11x PWM outputs, 9-36V DC IN (3-8S LiPo), 220A Current Sensor, BEC 12V 2A, 5V 1.5A and Dual analog camera signal inputs.

Specifications

  • MCU: 168MHz STM32F405RGT6
  • IMU: ICM42688-P (SPI)
  • Baro: SPL06-001 (I2C)
  • OSD: AT7456E (SPI)
  • Blackbox: MicroSD slot (SPI)
  • 6x UARTs, 1x Softserial_Tx option(INAV/BF)
  • 11x PWM outputs (8x Dshot compatible with BF/ArduPilot)
  • 1x I2C
  • 4x ADC (VBAT, Current, RSSI, Airspeed)
  • 1x spare PINIO
  • 4x individual ESC power/signal pads
  • 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
  • Built in inverter on UART2-RX for SBUS input
  • Switchable Dual Camera Input

PDB Specifications

  • Input: 9~36V (3~8S LiPo)
  • PDB: 4x 35A (Max.4x 50A)
  • BEC: 5V 1.5A
  • BEC: 12V 2A
  • LDO 3.3V: 200mA
  • Current Senor: 220A, 3.3V ADC (INAV/BF scale 150, ArduPilot 66.7 A/V)
  • Battery Voltage divider 1K:20K (INAV scale 2100, BF scale 210, ArduPilot BATT_VOLT_MULT 21.0)

Firmware

  • ArduPilot: MatekF405-TE
  • INAV: MATEKF405TE_SD
  • BetaFlight: MATEKF405TE_SD

Dimensions

  • Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
  • Dimensions: 36 x 46 mm
  • Weight: 10g

Includes

  • Matek F405-TE Flight Controller
  • 6x silicon grommets M4 to M3
  • 1x Rubycon ZLH 35V/470uF (Low ESR)

 Layout

F405-TE

Wiring

F405-TE wiring

More Info

  • SKU: 19673
  • Barcode: 6910236005004
 

Overall rating: 4.6666665 / 5 from 3 reviews.

AI Generated Review Summary

Summary topics

Review topics: [].

Review highlights

Reviews

Awesome

"It works great"

— Terry B. (5/5)

Best FC with PDB out there.

"Best FC with PDB out there if you are running single escs on the arms of your drones. The pads are big and clearly marked, Matek is a reliable and high quality brand -what is there not to like? A+++++ My go to board for single escs."

— erick g. (5/5)

Perfect F4 FC

"6 Uarts small package 30 x 30 and can run iNav Betafligjt and Mavlink what more do you want?"

— Robert L. (4/5)

Q&A

If I want to use dshot on all four escs could I wire them to s1, s2, s4, and s6 since dshot doesn't work on s3, s5, and s7? Also, If I did that would I have to change some other settings to show an esc on s6 somewhere?
Try INAV-7 configurator. According to Matek Systems dshot issue should be fixed in 7 release.
What firmware comes on the flight controller betaflght ?.?
One of the following types of firmware has to be flashed to new FC, ArduPilot MatekF405-TE, INAV and BetaFlight MATEKF405TE