With Tiny Whoops and other micro quads, literally anything can be a gate but sometimes you just need to take it a step further... These gates are ...View full details
This is the latest PH 2.0 solid pin pigtail connector, AKA the "Power Whoop Connector". This connector will allow you to fly longer, and with more ...View full details
All batteries must be shipped by a ground shipping method. RDQ is proud to feature the latest and greatest technology in the 250mAh 3.8V LiHV 1S PH...View full details
NOTE: The new colors of the Tiny Hawk frame can be set to either the higher or lower camera angles. The white frame can ONLY be set to the lower po...View full details
This is the PH 2.0 solid pin pigtail connector, AKA the "Power Whoop Connector". This connector will allow you to fly longer, and with more power a...View full details
Note, this board is capable of charging 2s batteries like our RDQ Series 300mah 2S battery. However, there are no balance ports on it since it's or...View full details
This 3D print is meant to adapt the RDQ Series 300mah 2S 70C 7.6V HV FPV Micro Battery to several of the 2S whoops that we carry. The Mobula7 V1 or...View full details
The V3 version has all the function of V2 board, also add the following 2 additional function. Add 8M Flash chip for Betaflight Black Box. 3 full ...View full details
You know how hard they are to pull apart at the board, in the frame, without F*#&ing up the wires?
Yeah, THIS is the tool for that!
this little tool was made to remove the motor wire connectors from the board, not the props.
It actually sucks as a prop tool, because it's not a prop tool
Join our mailing list and stay up to date on the latest and greatest in FPV Drones!