(PRE-ORDER) Sub250 Whoopfly16 BNF 1.6" Analog Ultra-Light 1S Whoop - ELRS 2.4GHz (SPI)

Pre-Orders shipping ASAP!

The Sub250 Whoopfly16 BNF is an ultra-light analog 1S mini Whoop designed for a smooth indoor flying experience. It features an inverted pusher FPV drone layout, a one-piece injection-molded protective ring frame, and a short wheelbase to provide maximum safety and protection. Powered by a popular 1002 motor, this reliable drone delivers a strong and effortless user experience. Whoopfly16 can adapt to mainstream 1S image transmission (analog / HD Zero / AVATAR).. The analog video transmission will be equipped with an Ant eco lens from Caddx, and the elevation angle of the lens can be adjusted upwards by 30 degrees. With the latest 1s 530mah battery, the battery life can reach 4 minutes and 30 seconds.

Make sure to check out all of our Analog BNF quads as well as the rest of our Sub250 selection!

Features

• Inverted whoop FPV drone makes the paddle and motor more efficient.
  
• With the new 1S 530mah LiHV battery
• Highly integrated flight control, integrated flight control, ESC, remote control receiver, and video transmission.
• One-piece injection molded protective ring frame, higher strength, and less deformation of the frame during aggressive flight.
• The protection of the circle is enhanced, and novices and experienced pilots both are safe.
• There are many options for image transmission, you can choose HD Zero /AVATAR and analog image transmission
• Use 1002 21000kv motor, abundant power "always ready to overtake"
  
• Indoor flight is safer with a small wheelbase and a protective ring, and it is handier to fly with a reasonable combination.
• Suitable for beginner outdoor advanced racing practice

Specification 

• Analog Version
  
• Product name: Whoopfly16
  
• Frame: WF16
  
• Wheelbase size: 75mm
  
• Flight control system: Redfox A1
  
• MCU: STMF411
  
• IMU: ICM42688-P
  
• OSD: BetaFlight OSD w/AT7456E chip
  
• ESC: Redfox A1 4IN1 5A ESC
  
• VTX: VTX 5.8G 200mW
  
• Lens: Caddx Ant eco
  
• Propeller: Gemfan 1608-3
  
• Antenna: 5.8g copper tube antenna 70mm
  
• weight: 37.7g
  
• Receiver: ELRS (SPI) 

Includes

• 1x Sub250 Whoopfly16 BNF 1.6" Analog Ultra-Light 1S Whoop - ELRS 2.4GHz (SPI)
• 4x M1.4 cross screws
  
• 1x Blue frame protection cotton
  
• 1x Red frame protective cotton
  
• 1x L-shaped inner hexagon screw blade
  
• 1x Cross screw blade
  
• 2x 3M double-sided tape
  
• 4x 1608-3 propellers