The Vifly Finder 2 is compatible with any flight controller or receiver with buzzer or pwm connection (just about everything) and its internal battery means it keeps functioning even if your flight battery is ejected, damaged or drained. This is a very simple to use, very effective drone recovery device.
For the VILFY Finder 2, we have released a new version. The new version has longer working time and louder volume. In addition, the battery discharge rate lowered a lot and it can be stored for very long time even you didn't charge it. "
Advanced ViSense Technology. With ViSense-based technology, the VIFLY Finder 2 can power itself to beep even the quad battery has been ejected. Even more, the built-in light sensor can detect light intensity and then smartly control the LED light to flash. Besides, it enables the buzzer automatically enter into sleep mode at night to save power and not disturb.
Much Louder than Standard Buzzer.To easily find the lost drone in long distance, the VIFLY Finder 2 buzzer is designed to install a very loud beeper that the DB is over 100.
Two Options to Disarm the Buzzer. Option 1, Disarm with button: Disconnect main battery, hold disarm button on VIFLY Finder 2 for 1-5 seconds then release. Option 2, Disarm with main battery: Disconnect main battery, then connect main battery for 3-6 seconds and disconnect it again. It will beep 3 times when disarmed successfully.
Compatible with Both FPV quadcopter and RC Airplane. VIFLY finder 2 is programmed to be compatible with any flight controllers with PWM or Buzzer connections in your FPV quads, and regular receivers in your RC airplanes. No extra setup required, it will automatically recognize the device it is connected to.
Specifications
Volume: Up to 105 dB
Working Time: Up to 30 hours
Charge Time: 1.5 hours
Battery: 80mAh LiPo
Input Voltage:4.5-8.5V
Dimensions: 24x13x16 mm
Weight: 5 g
Wiring Diagram
Wiring Diagram:
Simply connects the VIFLY Finder 2 to your flight controller(racing drone) or receiver(RC airplane) via 3 wires, and it’s ready to enjoy your flight.
How To Use
More Info
SKU:
11197
Barcode:
714676995101
Overall rating: 4.7766666 / 5 from 300 reviews.
AI Generated Review Summary
The ViFly Finder 2 is a highly effective and easy-to-use drone recovery device with advanced ViSense technology. It features a loud beeper, a built-in light sensor, and compatibility with various flight controllers and receivers. Customers appreciate its long working time and low battery discharge rate, though some have mixed opinions on the volume and button accessibility.
"Great little lightweight model finder for an affordable price!" — Zac P.
"Awesome buzzer and finder" — ewiley
"They make finding your quad so much easier, Have them on all my quads that have room to fit them." — noscade f.
Reviews
Saves you the cost of a drone
"Crashed my ZOHD Dart XLE twice, and both times, the battery ejected. The first one was in hilly terrain, and the only things I had were the DVR footage and the beeper to locate it. The second was beyond a hedgerow. In both circumstances, the beeper was the only thing that allowed me to recover hundreds of dollars worth of electronics. I will also be adding GPS telemetry to my RC screen in the future! Only downside of this beeper is that the power button is a bit fiddly, as well as it's connector. On fixed wing builds, it can be harder to mount a beeper with the included zip tie. I ended up using glue. Small downsides for a larger return on investment."
— Cupric (5/5)
"Easy install just make sure ground goes to actual ground . Other two go on buzzer pads . Strope was brighter then i thought it would be"
— James (5/5)
Vifly finder 2
"Great lil buzzer. Super loud!"
— Lance B. (5/5)
"The best buzzer in the World!"
— Emmanuel (5/5)
Great Buzzer
"Super loud buzzer and works exactly as expected! I am very happy with my buzzer. My buzzer goes where I go and more. I love buzzer. Thank you buzzer for being you. I am grateful for you buzzer."
— Luka K. (5/5)
Works great at first it
"Works great at first it didn’t work so don’t do what I did and solder the red and yellow wires wrong on the board. Everything is clearly labeled and no reason not to get it right no harm was done just removed and reinstalled correctly works great"
— Jonathan C. (5/5)
Help finding your drone if the battery comes unplugged
"Great loud buzzer and I use B-7000 glue to attach to the base board with the button shown thro a cutout or the buzzer hole like the iFlight Nazgul has."
— George B. (5/5)
A Mighty Beeper
"Tiny but the buzzer packs a punch. These work great and don't take much effort to integrate into most quad builds. Package includes everything you need."
— Jesse D. (5/5)
Must have for all drones
"Loud and easy to set up."
— Nick F. (5/5)
Great
"Works as described."
— Michael K. (5/5)
Q&A
How is it charged ? Will it charge thru the FC during flights ?
This is correct, it will be charged during normal flight use.
can this work on the DJI FPV setup? if so how?
Great question! The buzzer should be wired to your FC which is not effected by the DJI system and will work the way it is supposed to.
Stay Connected
Join our mailing list and stay up to date on the latest and greatest in FPV Drones!
Choosing a selection results in a full page refresh.
