ESC Accessories

This is a great and quick "solder n' go" product if you need a capacitor for your quad. The capacitor and pigtail come pre-soldered together and al...

***Please note, the straight pad units are factory messups. We did not ask them to make us a straight pad board but they did. We will not be carryi...

We have expanded our line of building supplies with the addition of a variety of clear heat shrink. Good for a wide range of uses, from making your...

High quality silicone insulated wire. 1 ft. of each*, red and black. Choose the gauge you'd like! 12 AWG 14 AWG 16 AWG 18 AWG 20 AWG 22 AWG ...

Every OCD builder out there needs a way to hide all of those normal looking cables... so here you go!  3/8th of a inch to fit all of your normal mo...

We cannot guarantee that it will add thrust to your craft but we promise it will look faster... This is a sticker that can be added on to a 1000uf ...

Spare / replacement heavy gauge XT30 pigtail with capacitor. We also carry a 20AWG version. Check out the rest of our pigtails & connectors! Sp...

Sold in sets of 4. ESC covers to protect your ESC's from prop strikes and crash damage. Made with TPU and are super durable. Comes in 2 sizes. Chec...

This accessory was designed to stop the overload of EMF transmissions to your flight controller.  Add this piece of copper foil onto the mosfet sur...

 Murica! This is a sticker that can be added on to a 1000uf 35v Capacitor.  

It will not give your craft wings but it will keep the competition wondering...   This is a sticker that can be added on to a 1000uf 35v Capacitor.  

"Hold my beer" has a whole new meaning...   This is a sticker that can be added on to a 1000uf 35v Capacitor.

For the kid in all of us... This is a sticker that can be added on to a 1000uf 35v Capacitor.  

Always refreshing... This is a sticker that can be added on to a 1000uf 35v Capacitor.  

The True North strong and free! This is a sticker that can be added on to a 1000uf 35v Capacitor.

NOTE: PICTURES ARE FROM THE OLDER VERSION. UPDATED PICTURES INCOMING Similar to the RaceWire, this product from CLRacing offers protection of your ...

Science! This 1000uf 35v Low ESR Capacitor, made by Panasonic, is great for reducing the noise in your setups. Ideal on setups which have little on...

The XT60 Cap Cap makes soldering a capacitor to your XT60 a painless process. Perfect for tight mini-quad builds, the XT60 cap cap makes your cap e...

This 330uf 25v Low ESR Capacitor, made by Panasonic, is great for reducing the noise in your setups. Ideal on setups which have little on-board fil...

Spare / replacement XT30 pigtail with capacitor.  Check out the rest of our parts and accessories for the Sailfly-X and Mobula7! Specifications Di...

Product: Low ESR Electrolytic Capacitors Termination Style: Radial Capacitance: 470 uF Voltage Rating DC: 35 VDC Tol...

Build Tutorial Video ***All XT60 Capacitor Connector Provision By EightAMFPV will now ship with an XT60 connector instead of the XT60 pigtail*** O...

Without the right tools, adding wire to a Capacitor can be annoying...  WaFL's Cap Cap is the perfect solution to keep your mounting options open a...

One of the many challenges of building a quality FPV mini or micro drone is dealing with noise filtering and voltage drop by power hungry motors an...

One of the many challenges of building a quality FPV mini or micro drone is dealing with noise filtering and voltage drop by power hungry motors an...

Replacement 8 pin Cable for the Bardwell Stack and the Ori32 4n1 ESC 32.5mm from end to end or 72mm from end to end  

The XT30 Cap Cap makes soldering a capacitor to your XT30 a painless process. Perfect for tight micro-quad builds, the XT30 cap cap makes your cap ...

The traditional race wires prevent damage to wires or even propeller strikes from dropping you out of the air, while also making motor swaps super ...

Replacement 7pin cable for the DalRC F722 Flight Controller 40mm from end to end