BetaFPV BNF Meteor75 1S Brushless Whoop (BT2.0) - ELRS 2.4GHz

In Stock
Pre Order
Coming Soon
Free Delivery on U.S.A. Orders $80 or more
Add to Wishlist

All products with batteries must be shipped by a ground shipping method.

Want a 1S whoop outdoor, around the house and yard? Meteor75 Brushless Whoop Quadcopter would be your best choice!

In order to meet the FPV pilot's requirement for ELRS whoop drones, the ELRS 2.4G version Meteor75 is here. 

Make sure to check out our other Pre-Built quads and the rest of our BetaFPV selection!


  • The FC board is the F4 1S 5A FC (ELRS 2.4G), which integrates BLHeli_S 5A ESC and SPI ExpressLRS 2.4G receiver
  • 5.8G VTX M03 could provide highest 350mW output power. So both the radio link and FPV video link could be long enough
  • Beside the update on the electronic components like FC and VTX, the propulsion system also  received an upgrade. 0802SE 19500KV Motors and Gemfan 40mm 2-blade propeller combination brings an excellent flying experience on the Meteor75 drone


  • Frame: Meteor75 Frame
  • Motors: 0802SE 19500KV
  • Props: 40mm 2-Blade Propellers (1.0mm Shaft)
  • Camera: C02 Micro Camera
  • Receiver: ELRS 2.4G
  • VTX: M03 25-350mW
  • Battery: BT2.0 450mAh 1S 30C
  • Weight (Without Battery): 24.0g (ELRS 2.4G)


  • Input Voltage: 1S
  • CPU: STM32F411CEU6 ( 100MHZ )
  • Gyro: ICM-20689/MPU-6000
  • Built-in Receiver: SPI ExpressLRS 2.4G
  • Receiver antenna: 2.4GHz SMD ceramic antenna
  • Dimensions: 29x29mm
  • Firmware Version: betaflight_4.3.0_STM32F411_norevision
  • OSD: Built-in BetaFlight OSD
  • Power Cable: 55mm, with BT2.0 connector
  • Current: 5A continuous and peak 6A (3 seconds)
  • ESC Firmware: O_H_5_48_REV16_8.HEX
  • Signal Support: D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM
  • Weight: 3.13g


  • 1x BetaFPV BNF Meteor75 1S Brushless Whoop (BT2.0) - ELRS 2.4GHz
  • 2x 450mAh 1S 30C Battery with BT2.0 connector
  • 1x BT2.0 Battery Charger and Voltage Tester
  • 1x TypeC USB cable
  • 1x Customized Carry Case
  • 1x Spare 40mm 2-Blade props (1.0mm Shaft)
  • 1x Screwdriver