TinysLEDs Tiny Rainbow RGB LED Quad Kit (44 LEDs & Wires)
44 LEDs and only soldering 3 wires?!
LEDs are even easier to add to your quad. 6x leds per side of quad and 8 per arm. Perfect for international races where LEDs are required!
- 5 volt 3 Amp Regulator
- 12 Side Fire LEDs, ( 6 each side)
- Soft Mounting for 20x20 and adapter included for 30x30
- JST-SH Connectors for Outputs to each arm.
- Solder pads on bottom of board for extra leds. and backup if connector breaks during crash.
- Supports up to 44 LEDs
- Connect up 8 of the Tiny Rainbow V2 with the LED Wire kit and add 44 leds to your quad.
Wire 2-6s Input to B+ pad, Wire GND and LED DI to the Flight Controller. Setup betaflight as 1 LED ( All 12 on board act as 1 led in parallel, This is better for racing)
Quick Setup Guide
Copy and paste the below text into the CLI of Betaflight. This will turn on your LEDs. You can further adjust under the Betaflight LED Strip tab.feature LED_STRIP
led 0 2,5::C:2
led 1 3,5::C:3
led 2 4,5::C:5
led 3 5,5::C:7
led 4 7,5::C:8
led 5 8,5::C:10
led 6 9,5::C:11
led 7 10,5::C:12 save