This is a great and quick "solder n' go" product if you need a capacitor for your quad. The capacitor and pigtail come pre-soldered together and al...
View full details
***Please note, the straight pad units are factory messups. We did not ask them to make us a straight pad board but they did. We will not be carryi...
View full details
Sold out
This JST SH and Molex PicoBlade DIY wiring harness kit takes the guess work out of hunting for the perfect fit for your 4 in 1 ESCs, Flight Control...
View full details
High quality silicone insulated wire. 1 ft. of each*, red and black. Choose the gauge you'd like! 12 AWG 14 AWG 16 AWG 18 AWG 20 AWG 22 AWG ...
View full details
RDQ MMCX Pigtail - 90 degree MMCX to SMA Pigtail 80mm from connector to connector
This XT60 pigtail is ready to be soldered onto your rig! With 14awg wire, and being about 4 inches long, it's ready to fly!
Power cable for the TS100. We also carry the RDQ Tool kit for all of your on-the-go repair! Specifications: Dimensions: 22" Long XT60 to 5.5x2.5mm ...
View full details
A high quality MMCX to SMA pigtail. Approximately 65mm long. Perfect for your Mach 2 Video Transmitter! Weighs only 4.63g!
Every OCD builder out there needs a way to hide all of those normal looking cables... so here you go! 3/8th of a inch to fit all of your normal mo...
View full details
This 3" SMA to UFL pigtail will fit most VTXs with the same connector. Check out the rest of our pigtails, adapters & connectors!
Carrying case for the TS100 Portable Soldering Iron
This new SMA Extension can be used for a variety of FPV applications. This can be mounted on your long range build to move your antenna away from a...
View full details
Spare / replacement heavy gauge XT30 pigtail with capacitor. We also carry a 20AWG version. Check out the rest of our pigtails & connectors! Sp...
View full details
Sold out
This is the latest PH 2.0 solid pin pigtail connector, AKA the "Power Whoop Connector". This connector will allow you to fly longer, and with more ...
View full details
This 3D printed antenna holder attaches to any standoff, making antenna mounting a breeze!
Decent, cheap snips. Ideal for cutting wire, sprue, zip ties, plastic, and can be used to trim thin copper, brass, iron and aluminum. For thicker m...
View full details
Sold out
Finally we've got the solid pin, soldered 20 gauge 2S PH2.0 pigtail we've been looking for! Use this to connect two 1S batteries to your 2S micro q...
View full details
A XT30 pigtail with 3 inches of 16AWG cable for all of your micro needs! We also carry XT30 individual connectors!
Sold out
TPU lens protector for the DJI Air Unit Camera. Fits tightly around the lens.We also carry the Official DJI Lens Protector Kit, and replacement cam...
View full details
Choose 22 or 24 Gauge This little pigtail is a series connection to connect two 1S batteries to your 2S micro quad. This pigtail can be soldered t...
View full details
NL-227A Cordless Hot Glue Gun features a built-in lithium battery capable of melting glue just at 1 minute. It can be charged by power bank or any ...
View full details
All the wires you need for a full build. This will allow you to fully wire four ESCs, and maybe more if you're conservative with the build. We hope...
View full details
This cable is a replacement for the cable that comes with the Micro RDQ M8N GPS. Includes: 1x 8inch 4 pin cable
Tired of breaking the small plastic O-rings on your micro cam? Upgrade to a metal ring to avoid that issue with only a small amount a weight added...
View full details
Sold out
For every pilot who is tried of changing their plastic lock ring after a hard crash. Fits both Runcam and Foxeer lenses.
Sold out
Another great addition to add to your FPV workshop! Includes 1 piece. Check out our ever growing selection of tools and building supplies. Specs: ...
View full details
Typically used to connect a device with female a XT60 plug to a DC power supply, lead acid, SLA, or Pb field battery using Alligator clips. Check o...
View full details
Sold out
This cable is a replacement for the cable that comes with the RDQ BN - 880 Flight Control GPS Module. Includes: 1x 8 inch 6 pin Cable
Rotor Riot announces the world’s first wired controller approved by Apple for iOS devices that supports L3/R3 fire buttons on the joysticks. A full...
View full details
The HOTA D6 Pro supports 2 channels of 235W charging and features a highly optimized charging algorithm with efficiency up to 94%. The Pro model ha...
View full details
This XT30 pigtail is specially made for 4S micros, with a pre-soldered capacitor (25V/220μF) for protecting ESC board and reducing failures caused ...
View full details
Lens for the Caddx Micro SDR1/F1 2.1mm and Caddx Micro SDR2/F2 2.1mm
The LensPen MiniPro is the perfect lens cleaner for FPV! This thing will remove all that schmutz from your quad's optics, all the oil and fingerpri...
View full details
Sold out
This kit from EMAX includes everything you need to get up in the air with your TinyHawk 75mm Indoor Racing Drone! Check out all of our Tiny hawk r...
View full details
Caddx Ratel has a superb night vision effect, it can be seen clearly under the faint light. There are two colors to choose from, yellow and cola r...
View full details
Looking for the perfect camera to throw on your long range build? We've got you covered! Also check out our ever growing selection of Foxeer produ...
View full details
This is the newest version of this camera and DOES include a mounting bracket. Tremendously small and light, yet extremely capable and at a better ...
View full details
NOTE: PICTURES ARE FROM THE OLDER VERSION. UPDATED PICTURES INCOMING Similar to the RaceWire, this product from CLRacing offers protection of your ...
View full details
The HOTA D6 supports 2 channels of 235W charging (650W total) and features a highly optimized charging algorithm with efficiency up to 94%. It's ea...
View full details
The FrSky Wireless USB Dongle For Simulator allows you to wirelessly connect your FrSky transmitter to computer to use simulator. Just install the ...
View full details
Caddx's new nano (14x14mm) size fpv camera comes equipped with an optional shell that slides over the sensor housing to make this nano cam micro co...
View full details
Foxeer newest version of the Arrow Mini is packing a huge punch at a great price point! Upgraded with lighter color, more natural image, better sat...
View full details
The all time popular Fat Cable Two now has a push-button switch installed just below the "Y" allows you to switch the cable on/off at the push of...
View full details
Perfect arm LEDs for micro builds!Pin spacing compatible with JST 1.25mm connectors. Available in 5 colors (Green, Pink, Blue, White or Red) and 3 ...
View full details
*Please note that the SMA Adapter Cable has an RP-SMA jack. Pair of spare replacement Straight MMCX to SMA Cables for the DJI Digital FPV Air Unit....
View full details
TinysLEDs RaceLiteWires are even brighter and more lower profile than before. All at an even lower price! Check out all our LEDs and all everythin...
View full details
This is the new Fat Cable Two! The Fat Cable Two has two outputs, the primary to power the goggles and a secondary output (JST-XH balance lead) to...
View full details
*Please note that the SMA Adapter Cable has an RP-SMA jack. Pair of spare replacement Straight MMCX to SMA Cables for the DJI Digital FPV Air Unit....
View full details