Fractal Engineering Fractal 65 Pro Micro/Whoop Frame Kit - Choose Your Version
Are you a whoop racer seeking the best performance with no reliability sacrifice? An FPV pilot wanting a solid frame with fast maintenance? Or after a tough frame to keep you airborne, instead of flimsy nylon frames? If you answer yes to any of those, then the Fractal 65 Pro was designed for you! This kit contains all you need to construct your craft - it's compatible with most parts and has a 25.5x25.5mm mount for the AIO and motor mounts for 3xM1.4x6.6mm and 3xM1.6x5.5.
Choose between getting the Fractal 65 Pro Whoop Micro Frame Lite Kit, which does not come with ducts, or grab a combo of the Fractal 65 Pro Whoop Micro Frame Kit and Meteor65 Pro Whoop frame.
Note: This is designed for prop guards that fit 35mm props like the Meteor65 Pro. This will serve as your protection and allows you to replace a single duct where-as standard whoop frames need to be fully replaced when a single duct breaks.
The Pro version has been squished to the max to fit 35mm props with Meteor 65 Pro ducts.
- A variant of the Fractal 65 frame kit
- Squished to the max to fit 35mm props with Meteor 65Pro ducts
- Maintains 65mm motors distance to meet racing specs
- Still fits the camera between the front ducts 1.5mm Carbon Fiber / Individual Nylon ducts hybrid construction
- Low-profile camera mount, no props in view, no tilt offset
- Low Center of gravity, by bringing the AIO closer to the frame/motors
- Allows mounting with USB pointing up for easy accelerometer calibration
- No need for a canopy as all electronics are tucked safely between the ducts
- Maximum rigidity where it matters most; connecting the motors to the FC
- Easy maintenance, break one duct, replace only the single duct
Recommended Part List
BetaFPV Gemfan 1406 Tri-Blade 35mm Micro/Whoop Prop 4 Pack (1mm Shaft) - Choose Your Color
HappyModel EX 0802 19000Kv Whoop/Micro Motor for Mobula6 HD - CW
HappyModel EX 0802 25000Kv Whoop/Micro Motor for Mobula6 HD - CW
HappyModel RunCam Nano 3 800TVL CMOS FPV Camera w/ Holes & Plug for Mobula6
- HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC & 400mW VTX - ELRS SPI
HappyModel SuperBee F4 Lite AIO Whoop Flight Controller - Choose Version
- HappyModel CrossF4 F411 1-2S 5A 8Bit AIO Whoop Flight Controller - ELRS 2.4GHz
FEA optimization test performed, ensuring the stress gets spread out across the whole structure without concentrations
- CF Weight: 1.8g
- Motor Bolt Pattern: 6mm Tri-Mount & 5.5mm Tri-Mount
- Stack Size: 25x25mm
- 1x Fractal Engineering Fractal 65 Micro Frame Kit - Choose Your Version