GEPRC Stable Pro F7 Dual Stack/Combo (Dual Gyro F7 FC, 35A 32bit 4in1, 500mW VTX)

$89.99
Coming Soon
In Stock
Pre Order
Add to Wishlist

After four months of hard work, GEPRC got their DUAL ICM 20689 gyros working together perfectly, with processing handled by a powerful F7. This stack is their "Master version", the highest spec of its series. It benefits from a highly integrated minimalist layout. A 32bit 35A 4in1 provides plenty of power for the props, and a 500mW VTX provides plenty for the picture. All soft mounted for reduced gyro noise and cooler running motors. 

Check out all our stacks and combos, as well as our GEPRC products!

Features

  • F7 Support both dual ICM20689 gyroscopes to work simultaneously, Exquisite and perfect flight experience
  • Innovative soft damping design, suitable for most frame, ensures flight control and gyroscope without noise
  • Simple installation method, compact space
  • STM32 F405 MCU or STM32F722RET6 MCU
  • Newly upgraded BLheli_32 ESC, high-speed operation, 35A stable working voltage, maximum 45A (3 seconds)
  • Support 2-6s battery and current meter
  • Support blackbox and use 32M on-board flash storage
  • 8g VTX Support IRC protocol, PIT/ 25/100/200/500mw adjustable, 48 frequency
  • Mounting Holes: 20x20mm(M2)
  • Size: 26x26x21mm
  • Weight 16.5g (Including Wire and screws)

Specifications

STABLE PRO F7 Flight Controller

  • Model:STABLE PRO F7 35A
  • MCU: STM32F722RET6
  • IMU: 2x ICM20689(SPI)
  • BlackBox: 32Mb onboard Flash
  • OSD: BetaFlight OSD w/ AT7456E chip
  • Baro:NO
  • BEC Output: 5V@3A
  • Integrated LC Filter
  • Input Voltage: 2-6S Lipo
  • Firmware target: EXF722DUAL
  • Size: 26x26mm board, 20mm mounting holes (M2)

STABLE PRO F7 ESC BL32 2-6S 4in1

  • MCU:STM32F051
  • Input:2-6s lipo
  • Constant:35Amps
  • Burst:45Amps
  • Dimensions:31*31mm(including the power pads)
  • Mounting Holes:20*20mm,M2
  • Supports Dshot1200,Proshot,Oneshot,Multishot
  • Current meter: Yes
  • Target: GEPRC-BL32-4IN1

STABLE PRO F7 5.8g 500mW VTX 

  • Input voltage: 5V
  • Channel: 48
  • Power transmission: 0mW(Pit mode) / 25mW / 100mW / 200mW / 400mW/ 500mW
  • Size: 24 * 26 mm
  • Mounting Holes Dimension: 20mm x 20mm
  • Connector type: MMCX Connector
  • BEC Output:5V/1A for Camera of FC
  • Weight: 2.3g
  • Traditional button
  • IRC Tramp protocol

Includes

  • 1x F7 Flight Controller
  • 1x BLheli_32 35A 2-6S ESC
  • 1x 5.8g 500mW VTX
  • 1x Antenna
  • 1x Capacitor

You recently viewed

Clear recently viewed
x