Pigtails, Connectors & Adapters

This 3" SMA to UFL pigtail will fit most VTXs with the same connector. Check out the rest of our pigtails, adapters & connectors! Includes 1x ...

This DIY wiring harness kit takes the guess work out of hunting for the perfect fit for your 4 in 1 ESCs, Flight Controllers, VTXs and Cameras! Sto...

Spare / replacement heavy gauge XT30 pigtail with capacitor. We also carry a 20AWG version. Check out the rest of our pigtails & connectors! Sp...

Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 6S batteries! Note: Please chec...

This is a great and quick "solder n' go" product if you need a capacitor for your quad. The capacitor and pigtail come pre-soldered together and al...

A XT30 pigtail with 3 inches of 16AWG cable for all of your micro needs! We also carry XT30 individual connectors! Be sure to check out our tools &...

This XT60 pigtail is ready to be soldered onto your rig! With 14awg wire, and being about 4 inches long, it's ready to fly! We also have 4 packs in...

A set of 5 surface mount ufl connectors.With a little patience, repairing broken VTX and RX antenna connectors is worth the effort! Check out all o...

This XT60 male to XT60 female adapter will allow you to connect your setups in uniques ways, perfect for testing. Check out all our pigtails and co...

This new SMA Extension can be used for a variety of FPV applications. This can be mounted on your long range build to move your antenna away from a...

Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 4S batteries! Note: Please chec...

Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 2S batteries!  Note: Please che...

This DIY wiring kit takes the guesswork out of hunting for compatible wires to connect your camera and AIO board.  Some AIO boards, like the HappyM...

Single right angle / 90 degree SMA adapter. Only one connector is included. Check out all our pigtails, adapters and connectors! Includes 1x SMA ...

A high quality 90° MMCX to SMA pigtail.  Be sure to check out our tools & building supplies! Specifications Connector: MMCX Male to SMA Female...

Handy little metal adapters for using M2 screws on boards with M3 holes. Check out all the rest of our hardware! Includes 10x M2 to M3 Brass Adapt...

A note from GNB: We define this connector's "gender" by plastic not by metal bullet. Female is used on the Drone side while Male is used on the Bat...

An adapter made to charge your batteries with GNB27 connectors on a standard PH2.0 charge board as well as fly them on your PH2.0 micros! Check out...

Connect your SMA antennas to your DJI goggles and air units with these adapters. Check out all our pigtails, adapters and connectors! Includes 2x ...

This XT60 Parallel connector allows you to double up your flight packs. You can use two of your (Same cells count, capacity and C rating) freestyle...

Connect your RP-SMA DJI antennas to standard SMA pigtails with these adapters. If you're trying to connect an SMA antenna to the DJI Goggles this w...

Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 3S batteries! Note: Please chec...

MMCX to SMA Adapter Connector Check out all our pigtails, adapters and connectors! Includes 1x MMCX Male to SMA female adapter

This is the latest PH 2.0 solid pin pigtail connector, AKA the "Power Whoop Connector". This connector will allow you to fly longer, and with more ...

A special adapter for charging your X9D LiPo Battery. Check out all our pigtails and connectors, as well as our chargers and accessories! Specifica...

A high quality MMCX to SMA pigtail. Available in different lengths.  Be sure to check out our tools & building supplies! Specifications Connec...

Individual spare replacement female MMCX connector with solder posts for repairing your battered VTX. We've got replacement U.FL connectors as well...

This XT60 Parallel connector allows you to double up your flight packs. You can use two of your (Same cells count, capacity and C rating) freestyle...

This XT60 pigtail is ready to be soldered onto your rig!  Check out all our pigtails and connectors as well as tools and building supplies! Include...

Perfect for repairing or modifying your quad equipment.  RF113 is commonly used for RX antennas. Check out all of our tools and building supplies a...

Perfect for repairing or modifying your quad equipment.  RG316 is commonly used for TX and VTX antennas. Check out all of our tools and building su...

This is the PH 2.0 solid pin pigtail connector, AKA the "Power Whoop Connector". This connector will allow you to fly longer, and with more power a...

Typically used to connect a device with female a XT60 plug to a DC power supply, lead acid, SLA, or Pb field battery using Alligator clips. Check o...

The new high quality TrueRC SMA adapter, with grippy knurled finish and carefully tuned design. <0.1dB loss @5.8GHz! We also carry a straight ve...

New V2 comes with a tactile power button, 6S support and a cable management kit! The plug and play Digidapter from British Drone Industries is the ...

On the latest version, "OFF" Position is for charging 4.2V. The new 6 port 1S battery charger from BetaFPV supports PH2.0 and BT2.0 at the same tim...

The HD Zero MIPI Cable is a digital HD video connector between HD Zero series VTX and a MIPI camera. This MIPI cable is for use in FPV wings and mi...

Introducing the ImmersionRC Camcorder A/V Cable for ImmersionRC Powerplay. The ImmersionRC Powerplay has gained popularity among skilled videograph...

These  Cables are digital HD video cables that work with the DJI O3 system.  The DJI O3 Coaxial Camera Cable is a replacement or spare for the D...

Ensure your drone is flying at its best with these Gemfan Hurricane 3630 3.6" Tri-Blade Props. These props are durable and li...

This is your mobile FPV swiss army knife! You can flash and configure your FC & BLHeli_S ESCs, download and analyze your blackbox logs, check y...

The Lumenier Universal Antenna Adapter Kit allows you to upgrade your DJI Goggle 2 experience and improve your FPV performance.  Ea...

BT2.0 Connector - the most significant revolution in 1S Whoop Drone!  BT2.0 1S whoop cable pigtail is an option for you to modify your drone or you...

This is a replacement coaxial cable for the Caddx Vista system. These are available in 8cm, 12cm, 14cm, and 20cm. Be sure to choose the appropriate...

The Lumenier Camera Adapter Plates are specifically designed for the DJI O4 Air Unit. These plates ensure a perfect fit and hassle-free installatio...

NewBeeDrone XT60 Female to XT30 Male adapter (2Pack) 16AWG 10CM