HappyModel Larva X 2-3S BNF 2.5" Micro Drone - Choose Your RX

$111.99
In Stock
Pre Order
Coming Soon
Add to Wishlist

Happymodel is joining the fun with something on the larger end of the toothpick spectrum. Check out the performance in the flight videos below!

Be sure to check out all our pre-built quads, our Larva X parts selection, and our HappyModel gear!

Features

  • New Crazybee F4 PRO V3.0 AIO Flight controller 2-4s Lipo Compatible
  • Powerful and smoothly
  • Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles
  • Camera Angle adjustable
  • VTX power switchable 25mw~200mw
  • Smartaudio ready , change VTX bands, powers, channels via OSD
  • Receiver option : Frsky D8 ,Flysky , Specktrum ,Frsky RXSR ,TBS CRSF
  • Diamond VTX Ready
  • Compatible both for 2s-3s Lipo/LIHV

Specifications

  • Brand Name: Happymodel
  • Item Name: Larva X 2-3S 2.5inch Brushless FPV drone
  • Wheelbase: 100mm
  • Size: 88mm*88mm*45mm(without propellers)
  • Weight: 50g(without battery)
  • Recommended Battery: 3S 300mah/350mah  2S 450mah
Spare Parts Specifications:
  • Motor: EX1103
  • KV options: KV7000
  • Configu-ration:9N12P
  • Stator Diamter:11mm
  • Stator Length:3mm
  • Shaft Diameter: Φ1.5mm
  • Motor Dimension(Dia.*Len):Φ13.5mm*16mm
  • Weight(g):3.7g

Flight controller

  • (Frsky version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR
  • (Flysky version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS
  • (No RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX
  • MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
  • Sensor: MPU-6000(SPI connection)
  • Board size: 28.5 * 28.5MM
  • Power supply: 2-4S battery input (DC 7-17V)
  • Built-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)
  • Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable)
  • No RX version need to add external Receiver
  • Built-in Betaflight OSD(SPI Control)
  • Built-in Current meter Max 70A
  • Current meter scale set to 470
  • Built-in 5V 1A BEC
  • Built-in voltage detection

Onboard 4in1 ESC
  • MCU upgraded to EFM8BB21
  • Power supply: 2-4S LiPo/LiPo HV (7v/17v)
  • Current: 10A continuous peak 12A (5 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: F_H_40_REV16_5.HEX
  • Default protocol: DSHOT600

Internal Frsky NON-EU Receiver Version
  • SPI BUS receiver
  • Frsky D8/D16 switchable
  • Compatible Non EU transmitter both D8 and D16 mode
  • Channels: 8ch or 16ch
  • Failsafe support
  • No ground interference ( Transmitter and receiver 1 m from the ground): 300m

Internal Flysky Receiver Version
  • SPI BUS receiver
  • Protocol: AFHDS and AFHDS-2A Switchable
  • Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
  • No ground interference ( Transmitter and receiver 1 m from the ground): 300m
  • Failsafe support

External TBS Crossfire Version
  • CRSF Protocol , Official TBS transmitter compatible

External DSMX Version
  • Frequency range: 2.403-2.479Ghz
  • Input power: 3.3V -- 5V
  • Response time: 22ms / 11ms
  • Resolution: 1024/2048
  • Display method: LED
  • Operating voltage: 3.3V
  • Working current: 60MA
  • Size: 18mm*13mm*5mm
  • Weight: 0.9 g
  • Antenna length: 30mm
  • Data format: Serial port
  • Protocol: DSM2/DSMX
  • Distance: no ground interference (1 m from the ground ) > 300m

External Frsky RXSR Version
  • Weight: 1.5g
  • Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)
  • Operating Voltage Range: 3.5V~10V
  • Operating Current:70mA@5V
  • Firmware Upgradable
  • Compatibility: FrSky X Series modules and radios in D16 mode
  • Could support Frsky New ACCST Protocol ( Upgrade firmware)

Diamond_VTX
  • Output power: 25~200mw switchable
  • Frequency: 40CH
  • Input voltage: 3.3V 5.5V
  • Current consumption: 250mA~510mA(type)
  • Antenna: RG178 antenna
  • U.FL interface
  • Frequency: 5.8GHz 5bands 40 channels
  • With Raceband
  • Smartaudio ready
  • Weight: 3g without antenna
  • Video Output Size: VGA (640x480)
  • Video Output format: NTSC
  • Record video size : 1280x720 @25FPS
  • TF Card support: Max.32G
  • Interface: JST SH1.0 3pin for Camera
  •         JST SH1.0 5pin for Connect with F3/F4 Flight controller
  • Compress Format: AVI

Runcam NANO2
  • Model: Nano 2
  • Image Sensor: 1/3" CMOS
  • Horizontal Resolution: 700TVL
  • Lens: 2.1mm(M8) FOV 155°
  • Signal System: NTSC / PAL
  • S/N Ratio: >50dB
  • Electronic Shutter Speed: Auto
  • Auto Gain Control (AGC): Auto
  • Min. Illumination: 0.01Lux@1.2F
  • D-WDR: Auto
  • Day/Night: Color
  • Power: DC 3-5.5V
  • Current : 110mA@5V 120mA@3.3V
  • Housing Material: ABS
  • Net Weight: 3.2g
  • Dimensions: L14mm*W14mm*H16mm

Includes

  • 1x HappyModel Larva X 2-3S BNF 2.5" Micro Drone

You recently viewed

Clear recently viewed
x