HappyModel BNF Mobula 6 V2 1S Micro Whoop Quadcopter - Choose Your Version and Receiver

In Stock
Pre Order
Coming Soon
Free Delivery on U.S.A. Orders $80 or more
Add to Wishlist

All product containing lithium batteries must be shipped by a ground shipping method.

This is the V2 version of the Mobula 6. This version features an ICM20689 Gyro as well as an OpenVTX 400mW VTX.

The DSMX version is not currently compatible with Spektrum DXE and DX6E radio transmitter. HappyModel is working on fixing this with the next release of BetaFlight.

The Mobula6 raises the bar on 1S whoop performance with an incredible power to weight ratio thanks to it's true all in one Crazybee board and lightweight FPV camera! Check out the flight videos below!

Choose the receiver right for you, and select Race(25000Kv) or Standard(19000Kv) version!

We recommend RDQ 1S 300mAh LiPos for this whoop! 

Be sure to check out all our pre-built quads, and all our Happymodel products


Crazybee F4 LiteFlight Controller
Built-in ESC & Receiver & VTX

  • Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR
  • (Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS
  • (DSM2/X SPI RX version) CRAZYBEEX DXS  DSM2/X version firmware target: CrazybeeF4DXS
  • MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
  • Sensor: ICM20689
  • Board size: 28.5 * 28.5MM
  • Power supply: 1S battery input (DC 2.9V-4.35V)
  • Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Built-in Betaflight OSD(SPI Control)
  • Built-in 5.8G 400mW VTX
  • Built-in SPI Frsky/Flysky/DSMX receiver
  • Built-in 5V 1A BEC
  • Built-in voltage detection

Onboard Frsky Receiver Version

  • SPI BUS receiver Frsky D8 or D16 compatible
  • Compatible Non EU transmitter D8 model
  • Channels: 8ch
  • Failsafe support
  • No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m

Onboard Flysky Receiver Version

  • SPI BUS receiver
  • Protocol: AFHDS and AFHDS-2A Switchable
  • Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
  • No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m
  • Failsafe support

Onboard DSM2/DSMX SPI receiver Version

  • SPI BUS receiver DSM2/DSMX compatible
  • Channels: Max 12ch
  • Failsafe support
  • No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m
  • RSSI enable(show on the goggles)

Onboard 5A BLheli_S 4in1 ESC

  • MCU upgraded to EFM8BB21
  • Power supply: 1S LiPo/LiPo HV
  • Current: 5A continuous peak 6A (3 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: O_H_5_REV16_7.HEX
  • Default protocol: DSHOT600

SE0802 19000KV / 25000KV Motor

  • Model: SE0802
  • KV: 19000KV / 25000KV Motor
  • Configu-ration:9N12P
  • Stator Diamter:8mm
  • Stator Length:2mm
  • Shaft Diameter:Φ1mm
  • Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
  • Weight(g):1.9g
  • No.of Cells(Lipo):1S only

Gemfan 1219 3-Blade Propeller Brand Name: Gemfan

  • Center Thickness:5mm
  • Prop Disk Diameter:31mm
  • Center Hole Inner diameter:1.0mm
  • Quantity: 4 CW & 4 CCW
  • Weight:0.28g

    Runcam Nano 3 FPV Camera

    • 1/3 CMOS 800TVL Camera
    • Field of View: 120°
    • Electronic Shutter Speed: Auto
    • Auto Gain Control (AGC): Auto
    • Min. Illumination: 0.01Lux@1.2F
    • D-WDR: Auto
    • Day/Night: Color
    • Power:DC 3-5.5V
    • Current: 110mA@5V 120mA@3.3V
    • Housing Material: ABS
    • Net Weight: 1.2g
    • Dimensions: L14mm*W14mm*H9mm


    • Continuous Discharge Rate: 30C
    • Size: 57mmx12mmx7mm
    • Weight: 8g
    • Connector: PH2.0
    • Quantity: 4 PCS


      • 1x Happy Model Mobula6 1S FPV Racing Drone
      • 4x 1S 300mAh 30C Lipo Battery
      • 1x 1S Lipo/LIHV USB Charger
      • 1x Propeller disassemble Tool