HappyModel BNF Mobula7 Whoop - Basic or Standard Kit - FRSKY

$101.99
$99.99
In Stock
Pre Order
Coming Soon
Receiver
Version
Free Delivery on U.S.A. Orders $60 or more
Add to Wishlist

All products containing lithium batteries must be shipped by a ground shipping method.

***If the button says "Add to Cart", the item is in stock and ships immediately!***

Whoops have gone to the next level! The Mobula7 has taken the internet by storm given its speed and capabilities in such a small package. Check out the video and specs of the Mobula 7 by Happy Model below!

Check out all our pre-built quads, and our selection of EMAX gear!

 


Features

  • New Crazybee F3 PRO Flight controller 1-2s Lipo compatible
  • 2S whoop more powerful and more flight time
  • Betaflight support , multi flight mode: ACRO/AIR/ANGLE
  • New 0802 Powerful and High efficiency Brushless motor and Smooth ESC
  • Smartaudio ready , change VTX bands, channels via OSD
  •   DSM2/DSMX and Frsky EU-LBT version are Serial-based receiver, so Smartaudio is not compatible.
  • Adjust the settings and the PID of the flight controller via OSD
  • Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
  • Flysky version support both AFHDS and AFHDS-2A protocol transmitter
  • DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter
  • Frsky EU-LBT version support Frsky EU-LBT firmware transmitter
  • Full telemetry function ready
  • Head lights ready
  • Camera angle adjustable
  • Real Bind and Fly version
  • Buzzer Ready

Specifications

  • Wheelbase: 75mm
  • Version: Basic Version / Standard Version ( Optional)
  • The difference between them is the package charger.
    •  Basic Version: USB Charger
    •  Standard Version: 6-way Charger
  • Receiver ( Optional):
    • Compatible Frsky NON-EU Receiver
    • Compatible Frsky EU-LBT   Receiver  ( XM+ Receiver)
    • Compatible Flysky AFHDS/ AFHDS-2A Receiver
    • Compatible DSM2/DSMX Receiver
  • Size: 98mm*98mm*36mm
  • Weight: 25.9g (without battery)
  • This is compatible with our 250mah HV Whoop Batteries

Crazybee F4 V2 Pro Flight Controller

  • Board size: 28.5 * 28.5MM
  • Power supply: 2-4S battery input (DC 7-17V)
  • Built-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)
  • Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable)
  • No RX version need to add external Receiver
  • Built-in Betaflight OSD(SPI Control)
  • Built-in Current meter Max 70A
  • Current meter scale set to 470
  • Built-in 5V 1A BEC
  • Built-in voltage detection
  • MCU upgraded to EFM8BB21
  • Power supply: 2-4S LiPo/LiPo HV (7v/17v)
  • Current: 10A continuous peak 12A (5 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: F_H_40_REV16_5.HEX
  • Default protocol: DSHOT600

Onboard 5A 4 In 1 ESC

  • Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
  • MCU upgraded to EFM8BB21
  • Current: 5A continuous peak 6A (3 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: S_H_50_REV16_7
  • Default protocol: DSHOT600 

Onboard Frsky NON-EU receiver Version

  • SPI BUS receiver
  • Frsky D8/D16 switchable
  • Compatible Non EU transmitter both D8 and D16 mode
  • Channels: 8ch or 16ch
  • Failsafe support
  • No ground interference ( Transmitter and receiver 1 m from the ground): 300m

Onboard Flysky receiver Version

  • SPI BUS receiver
  • Protocol: AFHDS and AFHDS-2A Switchable
  • Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
  • Failsafe support
  • No ground interference ( Transmitter and receiver 1 m from the ground): 300m

Onboard DSM2 / DSMX receiver version

  • Serial bus receiver
  • Protocol: DSM2/DSMX compatible
  • Channels:6-9 (Depend on your radio)
  • No ground interference ( Transmitter and receiver 1 m from the ground): 300m

SE0802 16000KV Motor

  • Model: SE0802KV: 16000KV
  • Configuration: 9N12P
  • Stator Diamter: 8mm
  • Stator Length: 2mm
  • Shaft Diameter: Φ1.0
  • Motor Dimension (Dia.*Len) : Φ10.5*14.5mm
  • Weight: 1.8g
  • Support 1-2S Lipo
  • No.of Cells: 1S Lipo

5.8G VTX AIO Camera

  • 5.8G 40CH 25mW VTX
  • Output power: 25mw
  • Frequency: 40CH
  • Input voltage: 3.3V 5.5V
  • Current consumption: 300mA(type)
  • 700TVL FOV120 Camera
  • Camera resolution: 700TVL
  • Field of view: 120°
  • Video Format: NTSC
  • Antenna: RG178 antenna
  • Frequency: 5.8GHz 5bands 40 channels
  • With Raceband
  • Smartaudio ready(Frsky EU-LBT and DSMX version not compatible)
  • Size: 13.9"12.0mm ( L*W )
  • Weight: 3g

Lipo Battery

  • Capacity:250mAh
  • Voltage:3.8v
  • Continuous Discharge Rate: 30C
  • Instantaneous discharge rate: 60C
  • Size: 55mmx12mmx7mm
  • Weight: 6.5g
  • Connector: PH2.0

Includes


Basic Version


  • 1x Mobula7 75mm FPV Drone
  • 4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
  • 4x 3.8v 250mah 30C/60C Lipo battery
  • 1x USB Lipo/LIHV Charger
  • 1x Fixing Mount for Lipo Battery
  • 1x Propeller Disassemble Tool

1x Screwdriver

Standard Version

  • 1x Mobula7 75mm FPV Drone
  • 4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
  • 4x 3.8v 250mah 30C/60C Lipo battery
  • 1x 1S06 6 Way Lipo/LIHV charger
  • 1x Propeller Disassemble Tool
  • 1x Fixing Mount for Lipo Battery
  • 1x Screwdriver 

 


Tune

Your Mobula7’s flight controller controls its flight through settings known as PIDS. Changing these changes the characteristics of your quad’s flight. RDQ’s recommended Mobula7 tune is:

set p_pitch = 65
set i_pitch = 80
set d_pitch = 50
set f_pitch = 96
set p_roll = 65
set i_roll = 80
set d_roll = 50
set f_roll = 96
set p_yaw = 65
set i_yaw = 75
set d_yaw = 0
set f_yaw = 100

 

To setup this tune, connect your Mobula7 to betaflight and click the CLI tab. Copy and paste the above settings in, hit enter, type save, then hit enter again. Enjoy your Mobula’s improved flight characteristics! 

The new betaflight configurator 10.5.0 and 10.5.1 are not compatible with Mobula7 and Mobula7 HD for now. HappyModel suggests using Betaflight configurator 10.4.0 




x