Happymodel Products

Replacement part for the HappyModel Crux3 Check out the HappyModel Crux3 Quad and Accessories Collection. Specifications Image Sensor: 1/3" CMOS S...

The ideal antenna for your Express LRS Module! Designed specifically for the Happy Model ES24TX but will work on any module with SMA connector and ...

This is a replacement bottom plate for the Crux35 and Crux35 HD frames. Check out our other Crux35 accessories, as well as our entire Happymodel se...

Pre-Orders shipping ASAP! The HappyModel BNF 1S Mobula 7 HD Whoop version is a light and efficient 75mm brushless whoop which provides 1080P HD vid...

The Happymodel Mobula 6 HDZero 1S Whoop is the very first 65mm HD brushless whoop in the world, weighing less than 23.5 grams! The Mobula6 is a sm...

It's finally here! The ultralight 1s 5a AIO of the future comes in at a clean 2.8g. This is the AIO that got the mobula6 HDZero whoop under 25 gram...

Recently the ExpressLRS system has become one of the most popular receiver systems on the market. This receiver will let you connect to any Express...

The Happymodel EP2 TCXO RX is a nano-sized true diversity 2.4GHz ELRS receiver with RF amps. This TCXO Rx receiver uses a temperature-compensated c...

This 5-in-1 flight controller is inspired by Happymodel's Official Pilot - Angry Don FPV! The Happymodel Diamond F4 AIO 5-IN-1 Flight controller ha...

Spare replacement bell for Happymodel EX1102 motors. Check out the rest of our motor parts & accessories and our Happymodel selection! Includes...

The Happymodel SE0702 11000KV are the direct replacement motors for the Bassline 2S, so RDQ has you covered! It will also work great one any 2" Too...

Please note that this version is a kit and AP! does NOT come with an O3 air unit, O3 camera and SanDisk Card. Experience powerful performance with ...

HappyModel continues to impress with yet another fantastic AIO for whoop applications! Check out the HappyModel CrossF4 1-2S AIO Whoop Flight...

Recently the ExpressLRS system has become one of the most popular receiver systems on the market. This kit from Happymodel is a great combo to star...

Pre-Orders shipping ASAP! All products containing batteries must be shipped by a ground shipping method. The Mobula6 Micro FPV Whoop features the R...

An F405 chip FC with built-in Serial ELRS receiver, 4in1 12A ESC, and 8Mbp black box. Optimized layout, supports 1-2S Lipo/LiHV. Perfec...

Equip your 2-4S drone with the HappyModel CrazyF411 F4 Flight Controller. Enjoy flying with its 20A 8Bit 4in1 ESC and ELRS 2.4GHz receiver fe...

The Happymodel Moblite7 HDZero Whoop is a 75mm HD brushless whoop weighing just 29.5 grams. It features the HDZero Whoop Lite VTX and Nano Camera a...

Can be used for any build and a perfect replacement part for the HappyModel Crux3 Check out the our other motors as well as our HappyModel Crux3 Qu...

The Happymodel EX1002 is a 1002 brushless motor with 20000KV. This is a replacement motor for the Happymodel 1S HDZero Whoop. Check out the rest of...

Equipped with an ExpressLRS built-in SPI receiver, you'll never have to worry about range when whooping!  This version of the Mobula6 also has anot...

Get ready to experience the thrill of FPV racing with the HappyModel Bassline FPV Drone Frame Kit! This high-quality frame kit is designed for maxi...

This micro brushless motor was specifically designed for 1-2s micro drones and whoops. These are made for the Mobula7 micro drone but can be used w...

Pre-Orders shipping ASAP! Thanks to the new AIO flight controller and the new third-generation RS0802 brushless motor, the new Mobula7 1S Will be ...

Classic 0802 stator rated to be capable of 20,000Kv for major power, a good sweet spot for high Kv motors, where you get that extreme power without...

The Happymodel 1S Balance Charging Board allows you to charge up to four 1S LiPo batteries with PH2 connector at the same time. The board supports ...

Experience powerful performance with the HappyModel BNF Mobula8 1-2S HD 85mm! This amazing quadcopter comes with an amazing DJI O3 Air Unit and Mic...

Introducing the HappyModel Bassline 2S Micro FPV Racer Drone! This high-performance drone is perfect for FPV racing and freestyle flying. With its ...

HappyModel ES900 DUAL RX ELRS Diversity Receiver 915MHz / 868MHz Built-in TCXO for RC Airplane FPV Long Range Drones.  Check out the rest of our EL...

Notes: The ELRS RX and OPENVTX share the same Power input and GND pads, so if you use both ELRS RX and VTX then you just need to solder one Power i...

The X12 lite does away with the onboard VTX, shedding weight and giving you the option to add your own VTX. It also comes with an onboard ELR...

Make your drone projects even better with this HappyModel SE0702 0702 28000Kv Micro Motor. Its high-quality design offers efficient oper...

The Happymodel SE0802 19000KV are the direct replacement motors for the Mobula 6 HD 1S, so RDQ has you covered! It will also work great on racing w...

Introducing the Moblite7 Ultralight FPV Brushless Whoop! Made in collaboration with FPV pilot "Mr. Shutterbug," this whoop is one of the lightest 7...

This 5-in-1 flight controller is inspired by Happymodel's Official Pilot - Angry Don FPV! The Happymodel Diamond F4 AIO 5-IN-1 Flight controller ha...

The Happymodel Moblite 7 Walksnail Avatar Whoop is a 75mm HD brushless whoop weighing just 33.5 grams. It features the Walksnail Avatar 1S Mini VTX...

Are you trying to build an HD whoop, and there are no good AIO flight controllers out there fitting your requirements? Well, look no further than t...

The Happymodel SE0702 23000KV Brushless Motor is a perfect solution for your lightweight build. The lightest brushless motors all over the world, w...

The Super F405HD ELRS AIO flight controller comes with integrated UART 2.4GHz ExpressLRS receiver and 20A Blheli_s ESC(Bluejay firmware pre-install...

The world's first AIO 5in1 whoop flight controller with built-in ExpressLRS receiver is coming out now. This F4 flight controller has a built-in 5A...

Upgrade your whoop with a solid VTX with a DVR built in. Pair this with one of our whoop flight controllers, and check out the rest of our Happymod...

The CruxF405HD ELRS AIO flight controller comes with integrated UART 2.4GHz ExpressLRS receiver and 20A Blheli_s ESC(Bluejay firmware pre-installed...

This convenient Happymodel USB Charger is tailored for a 200-400 mAh battery. It has an LED light to indicate when charging is complete, as well as...