Hobbywing XRotor Flight Controller F4 by HobbyWing
The XRotor F4 Flight Controller, made by Hobbywing, has a solid following because of its ability to reliably perform for the pilot. Running off of Omnibus firmware, the flight controller oozes quality and high performance. See below for further details!
Super-high Running Frequency
The STM32F405 MCU which features the powerful computing capability and super-high running frequency allows the FC to run the PID and gyro with higher frequency. DS
DShot 150/300/600/1200, Oneshot125, Oneshot42, Multishot Modes Supported
Besides the latest Dshot 150/300/600/1200 mode, the XRotor F4 FC also supports the regular PWM mode, Oneshot125 mode, Oneshot42 mode and Multishot mode.
TF-card Insertion Supported
Onboard OSD microchip allows users to easily adjust various
(OSD) parameters via the Betaflight/Cleanflight software.
Onboard OSD Microchip
Onboard OSD microchip allows users to easily adjust various (OSD) parameters via the Betaflight/Cleanflight software.
BetaFlight/Cleanflight Firmware Ready
The FC which supports Betaflight/Cleanflight firmware & allows parameter adjustment via Betaflight /Cleanflight software is more applicable to FPV flying & racing.
Perfectly integrable with the Hobbywing 4IN1 ESC & VTX
It’s easy to wire and install when pairing the FC with a Hobbywing 4-in-1 tower ESC & an HOBBYWING VTX (Video Transmitter).
|XRotor Flight Controller F4|
|Application||FPVs with 130-280mm Diagonal Wheelbase|
|Compatible with (Modes)||PWM、Oneshot125、Oneshot42、Multishot、Dshot150、Dshot300、Dshot600|
|Compatible with (Transmitters)||
PPM, Spektrum, SBUS, SUMD, SUMH, XBU, IBUS、JETIEXBUS, CRSF, SRX
|ESC Programming||Stick Programming, BLHeliSuite|
|size/ weight||35*35mm / 6g|
We Also Recommend
EMAX Magnum Stack - Tower System - AIO F4 Flight Controller, ESC, VTX, and RX