The FETtec FC G4 features the latest STM32G4 processor. Providing unparalleled processing power to your aircraft. Along with an MPU6000 gyro, two 5...
View full details
F4 Wing FC at a great price from Jhemcu! Check out all of our Wing Flight Controllers. Features INAV Support Supports up to 2 motors and ...
View full details
The FETtec KISS F7 FC is finally here! Check out all our KISS compatible gear, and everything FETtec! Features Processor F7 [DShot 2400, Oneshot, ...
View full details
The Matek F722-Mini SE has been improved over the previous NON SE version and now has a BMP280 Barometer. Check out the entire Matek selection! S...
View full details
The T-Motor F7 Flight Controller now comes in a version meant specifically for the DJI Digital FPV System! Including a plug for your Air Unit and a...
View full details
RUSH BLADE F722 30x30 Flight Controller For Analog by RUSHFPV. This FC features MPU6000, Onboard OSD, and beta flight firmware. Check out all our ...
View full details
iNav and Betaflight compatible and packed with features, especially suited for long range builds. Check out all our 30x30 FCs as well as the entire...
View full details
With multiple UARTS and BECS, this flight controller can run all the peripherals you could ever want with ease. Check out all our 30x30 FCs and all...
View full details
SpeedyBee has stuffed everything you could ask for into this 30x30 FC. It has Bluetooth, Wi-Fi, DJI Plug and Play, an F7 MCU, and more! Check out ...
View full details
Replacement flight controller for the Diatone Mamba Power Tower Check out our huge selection of flight controllers and all our Diatone gear! Speci...
View full details
The latest version of the CLF4S is here! Version 1.6 will have voltage scale change from 110 to 160 in the battery tab, and user selectable BEC is ...
View full details
The SucceX-D F7 V2.2 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged...
View full details
Packed with features, the F405-SE FC from Matek is ready to go. Compatible with INAV, Betaflight, and ArduPilot. Check out our 30x30 Flight Control...
View full details
Cut down on the soldering and make sure you DJI Air Unit gets the right amount of voltage with this F722 Equipped DJI Plug-and-Play flight controll...
View full details
CLRacing gives you the option of a single MPU6000 gyro if you prefer it over their dual gyro version of the CLRacing F7 V2. The only difference bet...
View full details
Foxeers's V2 F7 FC has a clean layout with some quality components. No more worrying about lifting pads during crashes, this FC has through holes f...
View full details
The incredible CLRacing F7 Dual Flight controller, now available in an HD plug and play version! The 5V/VBatt pads will not work unless user1 mode ...
View full details
T-Motor's first F7 Flight Controller has arrived! Logical layout, designed to work seamlessly with the T-Motor F45 and F55 ESC. Check out all our 3...
View full details
Holybro has what you need for your next HD build with individual ESCs! Holybro Kakute F7 HDV All-In-One is designed to work with the DJI FPV VTx m...
View full details
Check out our other 30x30 flight controllers, as well as the rest of our HolyBro selection! Specifications Input Voltage: 2-10S LiPo MCU: STM32...
View full details
RUSH BLADE F722 30x30 Flight Controller by RUSHFPV for your DJI Digital FPV System. This FC features high-performance STM32 F722 MCU, MPU6000, and...
View full details
The new F405 board from Matek is packed with a 32K Gyro, Baro, BFOSD, and SD card slot. Using the ribbon connector with the Matek FCHUB-VTX or FCH...
View full details
GOKU Versatile F745PRO FC is a versatile and powerful flight control equipped with the smallest but most powerful F745 BGA Chipsets instead of ordi...
View full details
The CLRacing F7 Dual revision 2.2 has a notch cut out for tight builds or high camera tilt, as well as being able to power the CLRacing Bluetooth M...
View full details
The Mamba Basic F405 MK3 from Diatone has everything you need to get going, and more! Check out all our 30x30 FCs and all our Diatone Gear! Feature...
View full details
A great flight controller that is plug and play compatible with DJI Check out all our 30x30 Flight Controllers and all our HGLRC gear! Features ...
View full details
This is a replacement flight controller for the Diatone Mamba F405 DJI MK2 3-6S 30x30 Stack/Combo for DJI Check out our other great Diatone product...
View full details
The Mamba Basic F405 MK3 Lite from Diatone has everything you need to get going, and more! Check out all our 30x30 FCs and all our Diatone Gear! Fe...
View full details
Connect this FC directly to the SpeedyBee App via WiFi. No more cords or hauling your laptop out in the field to get your tune dialed in! Check ou...
View full details
Sold out
The next generation of RDQ Bardwell Flight Controller is here! Packed with features including an F7 processor, ICM20602 Gyro, several DC power outp...
View full details
Sold out
Packed with features, the H743-Slim from Matek is ready to go. Compatible with INAV, Betaflight, and ArduPilot. Check out our 30x30 Flight Control...
View full details
Sold out
The Holybro Kakute F7 flight controller makes it easy to build your multirotor. It integrates flight controller (FC) and on-screen display (OSD) in...
View full details
Sold out
The latest and greatest AIO FC from Matek is here and bringing new features to the table that pushes forward our hobby to a new extent! Check out ...
View full details
Sold out
The Radix 2 is the latest generation flight controller by BrainFPV. It is the successor of the legendary Radix flight controller and everything has...
View full details
Sold out
HolyBro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to ...
View full details
Sold out
A great option for those running individual ESCs who want a full featured F7 Flight Controller. Check out all our 30x30 Flight Controllers and all ...
View full details