Sold out
PLEASE READ BELOW SAFETY REMINDER. DO NOT FRY YOUR AIR UNIT!! The DJI plug&play port has no voltage regulator (BEC) and is passing through VBAT...
View full details
The FETtec FC G4 features the latest STM32G4 processor. Providing unparalleled processing power to your aircraft. Along with an MPU6000 gyro, two 5...
View full details
F4 Wing FC at a great price from Jhemcu! Check out all of our Wing Flight Controllers. Features INAV Support Supports up to 2 motors and ...
View full details
Using a powerful F722 chip and BLHELI_S ESC firmware, with integrated 5V/9V dual BEC, barometer, black box, WS2812LED, and 7 full UARTs, this AIO F...
View full details
This AIO features a F745 MCU along with a 32Bit 40A 4in1 ESC, and with 7 UARTS, this may very well be one of the top performing feature packed AIO ...
View full details
The FETtec KISS F7 FC is finally here! Check out all our KISS compatible gear, and everything FETtec! Features Processor F7 [DShot 2400, Oneshot, ...
View full details
Matek's H743 WING V2 Flight Controller arrives with new features and improvements over the original. This FC features a STM32H743VIT6 MCU running a...
View full details
Super powerful F745 DJI plug and play ready AIO flight controller with an integrated 40a 32Bit 4in1 ESC! This AIO has all the bells and whistles th...
View full details
High amp output toothpick board, great for those big boy toothpick builds. Check out all our Whoop FCs and our Jhemcu products! Specifications FC ...
View full details
Lightweight 20x20 AIO option from Jhemcu, great for keeping weight down on those cinewhoop builds. Check out all our Jhemcu products! Specification...
View full details
A nice option for those looking to build a toothpick with a little more power. Check out all our Whoop FCs and our Jhemcu products! Specifications...
View full details
The Matek F722-Mini SE has been improved over the previous NON SE version and now has a BMP280 Barometer. Check out the entire Matek selection! S...
View full details
Feature packed 20x20 FC from HolyBro. Check out all our our Holybro products! Specifications MCU: STM32F722RET6 32-bit processor,216MHz, 256Kbytes...
View full details
The T-Motor F7 Flight Controller now comes in a version meant specifically for the DJI Digital FPV System! Including a plug for your Air Unit and a...
View full details
RUSH BLADE F722 30x30 Flight Controller For Analog by RUSHFPV. This FC features MPU6000, Onboard OSD, and beta flight firmware. Check out all our ...
View full details
iNav and Betaflight compatible and packed with features, especially suited for long range builds. Check out all our 30x30 FCs as well as the entire...
View full details
With multiple UARTS and BECS, this flight controller can run all the peripherals you could ever want with ease. Check out all our 30x30 FCs and all...
View full details
SpeedyBee has stuffed everything you could ask for into this 30x30 FC. It has Bluetooth, Wi-Fi, DJI Plug and Play, an F7 MCU, and more! Check out ...
View full details
Replacement flight controller for the Diatone Mamba Power Tower Check out our huge selection of flight controllers and all our Diatone gear! Speci...
View full details
The latest version of the CLF4S is here! Version 1.6 will have voltage scale change from 110 to 160 in the battery tab, and user selectable BEC is ...
View full details
The SucceX-D F7 V2.2 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged...
View full details
Built for a new generation of toothpick racing quad, the new AIO brushless flight controller from Jhemcu can handle 25A continuous current. The boa...
View full details
HGLRC's 20x20 AIO FC/ESC is perfect for saving weight on cinewhoops while still provided the power necessary. Check out our 20x20 Flight Controlle...
View full details
The SucceX-D Mini F7 Flight Controller is designed to work seamlessly with DJI’s new HD FPV system. To make things as simple as possible, we have ...
View full details
Packed with features, the F405-SE FC from Matek is ready to go. Compatible with INAV, Betaflight, and ArduPilot. Check out our 30x30 Flight Control...
View full details
Built for a new generation of toothpick racing quad, the new AIO brushless flight controller from Jhemcu can handle 45A continuous current. The boa...
View full details
This flight controller is extremely versatile and is compatible with Betaflight, iNav, and Emuflight. Cool features include DJI Plug and Play, dedi...
View full details
The new iFlight BEAST series AIO FCs are ready for your ultimate build. A future-proof all-in-one FC to step up the game and make some more room fo...
View full details
This FC pairs seamlessly with any Aikon FC. The F7 MCU will allow you to dial in your tune the way you want it and the DJI plug and play means it'...
View full details
Built for a new generation of toothpick racing quad, the new AIO brushless flight controller from Jhemcu can handle 40A continuous current. The boa...
View full details
The Mamba Basic F722 Mini MK3 is anything but basic. Large solder pads, type-C USB, 2 BECs, Blackbox, OSD, and more! Browse our 20x20 FCs and our D...
View full details
This F722 20x20 FC is a great addition to any compatible build. Check out our 20x20 Flight Controllers and all our Foxeer products! Specifications...
View full details
Cut down on the soldering and make sure you DJI Air Unit gets the right amount of voltage with this F722 Equipped DJI Plug-and-Play flight controll...
View full details
FLYWOO's new top GOKU series AIO is finally here! GOKU GN405 S 20A FC is an economical and durable all-in-one AIO FC, which can meet most of your F...
View full details
The Mamba Basic F405 Mini MK3.5 features I2C function, 5 UARTS, Type-C USB, and more! Browse our 20x20 FCs and our Diatone Gear! Features I2C func...
View full details
Matek F722-PX F7 30x30 Flight Controller is loaded with an array of features and tons of room for peripherals, this board lets you choose how you w...
View full details
CLRacing gives you the option of a single MPU6000 gyro if you prefer it over their dual gyro version of the CLRacing F7 V2. The only difference bet...
View full details
Foxeers's V2 F7 FC has a clean layout with some quality components. No more worrying about lifting pads during crashes, this FC has through holes f...
View full details
T-Motor's first F7 Flight Controller has arrived! Logical layout, designed to work seamlessly with the T-Motor F45 and F55 ESC. Check out all our 3...
View full details
A great 20x20 flight controller that is plug and play compatible with the DJI Digital FPV System. Check out all our 20x20 FCs and all our T-Mot...
View full details
Holybro has what you need for your next HD build with individual ESCs! Holybro Kakute F7 HDV All-In-One is designed to work with the DJI FPV VTx m...
View full details
If you want to know what the pros fly, then here's your answer. Thomas BMS approves this flight controller, so what's stopping you? For freestyle ...
View full details
RUSH BLADE F722 30x30 Flight Controller by RUSHFPV for your DJI Digital FPV System. This FC features high-performance STM32 F722 MCU, MPU6000, and...
View full details
The new F405 board from Matek is packed with a 32K Gyro, Baro, BFOSD, and SD card slot. Using the ribbon connector with the Matek FCHUB-VTX or FCH...
View full details
Premium Controller with Quality Parts and FeaturesFeaturing F7 Processor to provide the best and most reliable quality and performance for either f...
View full details
The CLRacing F7 Dual revision 2.2 has a notch cut out for tight builds or high camera tilt, as well as being able to power the CLRacing Bluetooth M...
View full details
The Mamba Basic F405 MK3 from Diatone has everything you need to get going, and more! Check out all our 30x30 FCs and all our Diatone Gear! Feature...
View full details
Spare replacement FC for the Infinity30 Stack with plenty of UARTs and a plug and 9V 2A 18W BEC Design for DJI FPV Air Unit!. The prefect 30x30 FC ...
View full details