MegaBolt Freestyle is the base 30×30 esc with the capacitance expansion board installed from the factory. This gives the smoothers performance of ...
View full details
MegaBolt Race is the base 30×30 esc with a heat sink installed from the factory. This gives the best cooling for durability during racing of any o...
View full details
The FuriousFPV Racepit Mini is an excellent choice for your 20x20 stack size racer. Light and compact, but still containing everything you expect f...
View full details
The Matek Mini-VTX is a versatile, feature rich, and powerful video transmitter for your 20x20 or 30x30 stack. Check out all our 20x20 VTXs, 30x30...
View full details
The F765-WING is an incredibly feature rich wing flight controller that supports Betaflight, iNav and ArduPilot. If you love connecting all sorts o...
View full details
This is the 3rd generation high performance ESC & Flight controller combo from Hobbywing. A combination of the XRotor Micro 60A 4in1 ESC and th...
View full details
Sold out
HolyBro Kakute F7 HDV is designed to work with the DJI FPV VTx module. The GH port available on the board makes it much more convenient for you to ...
View full details
Sold out
Holybro's new BLHELI32 ESC with F3 MCU, gives smoother control and faster responds. Supports up to 55A burst and 40A continuous! Check out all our ...
View full details
Spare replacement 4in1 ESC for the Magnum stack in the EMAX Buzz. Check out the rest of our 30x30 4in1 ESCs and EMAX Buzz parts & accessories!...
View full details
Spare replacement FC for the Magnum stack in the EMAX Buzz. Check out the rest of our 30x30 Flight Controllers and EMAX Buzz parts & accessori...
View full details
Sold out
Premium Controller with Quality Parts and FeaturesFeaturing F4 Processor and 40Amp BLheli32 with NewBeeDrone Smoov-certified hardware design that s...
View full details
CLRacing gives you the option of a single MPU6000 gyro if you prefer it over their dual gyro version of the CLRacing F7 V2. The only difference bet...
View full details
Spare replacement flight controller for the iFlight SucceX-E stack. Check out all our 30x30 Flight Controllers and all out iFlight gear selection!...
View full details
Sold out
The SucceX-E is another great value stack from iFlight, this time in 30x30 size. Perfect for your next 5" iFlight build! Check out all our 30x30 st...
View full details
Spedix GS40F Mini is an reliable 20x20mm 6S 4-In-1 ESC. Limited by the smaller size of 20x20mm ESC, engineers have usually used a 3mm mini MOSFET, ...
View full details
Sold out
The new T-Motor F4 is a well laid out, full-featured FC with up to 6 uarts for your accessories along with an onboard 5V 2A BEC, LC filter, and OSD...
View full details
Sold out
After four months of hard work, GEPRC got their DUAL ICM 20689 gyros working together perfectly, with processing handled by a powerful F7. This sta...
View full details
IS40 4IN1 MINI is an extremely reliable 20*20mm mount 6S 4IN1 ESC. Limited by the smaller size of 20*20mm ESC, engineers have always used 3mm mini ...
View full details
Spare 4in1 ESC for the iFlight SucceX Mini F4 & F7 Stack V3. Check out our selection of 20x20 4in1 ESCs and all our iFlight gear! Specification...
View full details
Spare flight controller for the iFlight SucceX Mini F7 Stack V3. We carrry the stack with and without the VTX. Check out our selection of 20x20 fli...
View full details
The SucceX Mini F7 V3 TwinG // GYRO FUSION is the NEXT-GEN flight controller you need for your next build. This FC is ready for anything with 4 uar...
View full details
The SucceX Mini F7 V3 TwinG // GYRO FUSION is the NEXT-GEN flight controller you need for your next build. This FC is ready for anything with 4 uar...
View full details
The SucceX Mini F4 V3 TwinG // GYRO FUSION is the NEXT-GEN flight controller you need for your next build. This FC is ready for anything with 4 uar...
View full details
The SucceX Mini F4 V3 TwinG // GYRO FUSION is the NEXT-GEN flight controller you need for your next build. This FC is ready for anything with 4 uar...
View full details
The Aikon Race Dragon RD32 4-in-1 45A 6S is a new generation ESC that uses a high speed F3 MCU for maximum performance! Check out the rest of our 4...
View full details
If you never want to worry about your your 4-in-1 again, Hobbywing's XRotor 60A raises the bar once again! From Captain Vanover himself, this thi...
View full details
The F45A just got a revision adding a 10V 2A BEC! This ESC is T-Motor's 4-in-1 version of their popular F45A ESC. This 4-in-1 ESC packs 45A into an...
View full details
The Spedix LS40 is an incredibly slim and compact ESC, especially for packing a 40A punch! It's protected from heat buildup and impact by an alumin...
View full details
Sold out
The new T-Motor F4 / F55A Pro II Stack is a well laid out, full-featured setup with up to 6 uarts for your accessories along with an onboard 5V 2A ...
View full details
The new T-Motor F4 is a well laid out, full-featured FC with up to 6 uarts for your accessories along with an onboard 5V 2A BEC, LC filter, and OSD...
View full details
Note: The STM32F722 generates a decent amount of heat, please leave at least 5mm either side of the FC in your stack to allow adequate air circulat...
View full details
Note: The STM32F722 generates a decent amount of heat, please leave at least 5mm either side of the FC in your stack to allow adequate air circulat...
View full details
The ESC from the F722 Mini Stack, this a great value 4in1. We also carry the larger Mamba 506 Model if you want to go 30x30. Check out our selectio...
View full details
The ESC from the F722S Stack, this a great value 4in1. We also carry the smaller Mamba 306 Model if you want to go 20x20. Check out our selection o...
View full details
Note: The STM32F722 generates a decent amount of heat, please leave at least 5mm either side of the FC in your stack to allow adequate air circulat...
View full details
Note: The STM32F722 generates a decent amount of heat, please leave at least 5mm either side of the FC in your stack to allow adequate air circulat...
View full details
Sold out
The FlightOne Revolt OSD Lite flight controller is one of the most advanced, performance-driven, flight controllers ever designed. The RevoltOSD us...
View full details
The RacePit FC has all the bells & whistles you could want out of a Flight Controller. VTX switch, Cam switch, Blackbox, S.BUS inverter, OSD, B...
View full details
Holybro saves you time and guesswork in coming up with your perfect FPV stack. This stack combines the Kakute F7 FC, Atlatl HV V2 VTX, and the Tekk...
View full details
The BrainFPV team have squeezed your favorite flight controller down to 20x20. Everything you love about RADIX just got smaller. ...and cuter. We a...
View full details
The much anticipated Mr. Steele KISS PDB for the ImpulseRC Alien frame series! Built using Steele's preferred and tested components, and designed t...
View full details
The GS45 once again improves upon the previous model. This time increasing the maximum current output, changing the heatsink design, improving the ...
View full details
This crazy small (14.5x6.6x2.6mm) micro step down regulator is ideal for supplying smooth 5 volt power to your quad's electronics from sources from...
View full details
The iFlight 5V/12V Step Down Micro BEC features high-efficiency synchronous rectification and the ability to step down from a wide input voltage ra...
View full details
With the Speedy Bee F4 AIO FC, you no longer need to bring a laptop or tablet with you to tune or change settings in the field. They've integrated ...
View full details
Kakute F7 mini Specifications: MCU: STM32F745VGH6 32-bit processor,216MHz, 320Kbytes RAM, 1Mbytes Flash IMU: ICM20689 (SPI) Barometer: BMP280 USB ...
View full details
Specifications MCU: STM32F745VGH6 32-bit processor, 216MHz, 320Kbytes RAM, 1Mbytes Flash IMU: ICM20689 (SPI) Barometer: BMP280 USB VCP Driver (a...
View full details
F7's are getting better and better, and so is Betaflight's compatibility with them. The Holy bro Kakute F7 flight controller makes it easy to build...
View full details