SpeedyBee F7 V2 30x30 3-6S Stack/Combo for DJI (F7 HD FC / 32Bit 45A 4in1 ESC)

In Stock
Pre Order
Coming Soon
Free Delivery on U.S.A. Orders $80 or more
Add to Wishlist

This is by far one of the most featured packed FPV flight stacks to date!

It has Bluetooth, Wi-Fi, DJI Plug and Play, an F7 MCU, 32Bit 45A 4in1ESC and more!

Browse all our 30x30 Stacks and all our SpeedyBee products!


  • DJI Plug and Play 
  • Built in Wi-Fi and Bluetooth
  • Camera control pad
  • Blackbox
  • 6 Uarts, buzzer pad, and I2C
  • 45A 32Bit ESC


F7 V2 Flight Controller for DJI

  • MCU: STM32F722
  • IMU: MPU6000
  • USB: Type-C
  • Baro: BMP280 (I2C)
  • OSD: BetaFlight OSD w/ AT7456E chip
  • BLE Support, used for Flight Controller configuration
  • WiFi Support, used for data transfer, e.g firmware
  • flashing, and Blackbox analysis.
  • DJI Air Unit plug: A full DJI Air Unit JST slot onboard
  • BlackBox: 16MB onboard dataflash
  • Current Sensor 1 : 10 (Scale 168)
  • BetaFlight Camera Control Pad: Yes
  • Power input: 3S - 6S Lipo
  • 5V power output 7 * 5V output, 6 pads and a BZ+ pad used for Buzzer, the maximum load current is 2.5A. 9V * 1,
  • the maximum load current is 2.5A.
  • 9V power output 2 * 9V output, 1 pads and another one used for DJI slot
  • 4.5V power output 1 * 4.5V output pad
  • 3.3V power output 1 * 3.3V output pad, the maximum load current is 500mA.
  • ESC signal M1 - M4
  • UART: Full UART * 5(UART1, UART2, UART3, UART5, UART6)
  • ESC Telemetry: UART UART4 RX
  • I2C: Used for external Magnetometer, Sonar, etc.
  • LED: pin Used for WS2812 LED
  • Buzzer: BZ+ and BZ- pad used for 5V Buzzer
  • Boot button: Yes
  • RSSI input: Yes
  • SmartPort: Supported
  • Support Flight Controller Firmware BetaFlight(Default), EMUFlight
  • Target: SPEEDYBEEF7V2
  • Mounting: 30.5x30.5mm, 4mm hole size
  • Dimension 41x38x6.9mm
  • Weight 9g

32Bit 45A 3-6S 4in1 ESC

  • Firmware: BLHeli32 SpeedyBee 4in1
  • MCU: STM32F051
  • Continuous Current: 45A * 4
  • Burst Current: 55A(10S)
  • ESC Protocol: DSHOT300/600/1200
  • Power input: 3S - 6S LiPo
  • Power output: VBAT
  • Current Sensor Support (Scale 168)
  • ESC Telemetry Support
  • Mounting: 30.5x0.5mm, 4mm hole size
  • Dimension: 41x45x6.5mm
  • Weight: 12.5g


  • 1x SpeedyBee F7 V2 30x30 3-6S Stack/Combo for DJI (F7 HD FC / 32Bit 45A 4in1 ESC)

SpeedyBee F7 V2 30x30 3-6S Combo for DJI for Sale